ALEX Lesson Plans
Save to ALEX 
Share

Show Details
Title: Predict the Future?
Description:
Students will use data collected and a "bestfit line" to make predictions for the future. The example the students will be working on for this lesson will demonstrate an exponential regression.
Standard(s): [TC2] CA2 (912) 5: Utilize advanced features of spreadsheet software, including creating charts and graphs,
sorting and filtering data, creating formulas, and applying functions. [TC2] CA2 (912) 5: Utilize advanced features of spreadsheet software, including creating charts and graphs,
sorting and filtering data, creating formulas, and applying functions. [TC2] CA2 (912) 7: Utilize advanced features of database software, including merging data, sorting, filtering,
querying, and creating reports. [MA2013] AL1 (912) 12: Create equations and inequalities in one variable, and use them to solve problems. Include equations arising from linear and quadratic functions, and simple rational and exponential functions. [ACED1] [MA2013] AL1 (912) 31: Graph functions expressed symbolically and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 45: Represent data on two quantitative variables on a scatter plot, and describe how the variables are related. [SID6] [MA2013] PRE (912) 16: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. (Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity. Determine odd, even, neither.)* [FIF4] (Alabama)
Subject: Mathematics (9  12), or Technology Education (9  12)
Title: Predict the Future?
Description: Students will use data collected and a "bestfit line" to make predictions for the future. The example the students will be working on for this lesson will demonstrate an exponential regression.
Save to ALEX 
Share

Show Details
Title: Writing equations for parallel lines
Description:
Students will complete a cooperative group assignment to discover that parallel lines have the same slope. They will view a PowerPoint presentation illustrating how to write an equation of a line parallel to a given line through a given point. Additional practice will be provided by means of a worksheet.This lesson plan was created as a result of the Girls Engaged in Math and Science, GEMS Project funded by the Malone Family Foundation.
Standard(s): [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 34: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] (8) 7: Graph proportional relationships, interpreting the unit rate as the slope of the graph. Compare two different proportional relationships represented in different ways. [8EE5]
Subject: Mathematics (8  12)
Title: Writing equations for parallel lines
Description: Students will complete a cooperative group assignment to discover that parallel lines have the same slope. They will view a PowerPoint presentation illustrating how to write an equation of a line parallel to a given line through a given point. Additional practice will be provided by means of a worksheet.This lesson plan was created as a result of the Girls Engaged in Math and Science, GEMS Project funded by the Malone Family Foundation.
Save to ALEX 
Share

Show Details
Title: Exponential Growth and Decay
Description:
This lesson on exponential growth and decay involves a variety of teaching resources. There are a variety of websites used to teach and reinforce how to identify exponential growth or decay and how to solve problems relating to growth and decay. There is a lab provided that will help model these concepts being taught and computer based practice on these concepts. Videos are provided that give a picture image of how exponential growth and decay works. This lesson plan was created as a result of the Girls Engaged in Math and Science, GEMS Project funded by the Malone Family Foundation.
Standard(s): [MA2013] AL1 (912) 7: Interpret expressions that represent a quantity in terms of its context.* [ASSE1] [MA2013] AL1 (912) 9: Choose and produce an equivalent form of an expression to reveal and explain properties of the quantity represented by the expression.* [ASSE3] [MA2013] AL1 (912) 28: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity.* [FIF4] [MA2013] AL1 (912) 31: Graph functions expressed symbolically and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] AL1 (912) 32: Write a function defined by an expression in different but equivalent forms to reveal and explain different properties of the function. [FIF8] [MA2013] AL1 (912) 34: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] AL1 (912) 36: Identify the effect on the graph of replacing f(x) by f(x) + k, k f(x), f(kx), and f(x + k) for specific values of k (both positive and negative); find the value of k given the graphs. Experiment with cases and illustrate an explanation of the effects on the graph using technology. Include recognizing even and odd functions from their graphs and algebraic expressions for them. [FBF3] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 39: Observe, using graphs and tables, that a quantity increasing exponentially eventually exceeds a quantity increasing linearly, quadratically, or (more generally) as a polynomial function. [FLE3] [MA2013] AL2 (912) 30: Graph functions expressed symbolically, and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] AL2 (912) 34: Identify the effect on the graph of replacing f(x) by f(x) + k, k f(x), f(kx), and f(x + k) for specific values of k (both positive and negative); find the value of k given the graphs. Experiment with cases and illustrate an explanation of the effects on the graph using technology. Include recognizing even and odd functions from their graphs and algebraic expressions for them.
[FBF3] [MA2013] ALC (912) 3: Use formulas or equations of functions to calculate outcomes of exponential growth or decay. (Alabama) [MA2013] ALT (912) 12: Interpret expressions that represent a quantity in terms of its context.* [ASSE1] [MA2013] ALT (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] PRE (912) 16: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. (Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity. Determine odd, even, neither.)* [FIF4] (Alabama) [MA2013] ALT (912) 30: Graph functions expressed symbolically, and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] ALT (912) 34: Identify the effect on the graph of replacing f(x) by f(x) + k, k f(x), f(kx), and f(x + k) for specific values of k (both positive and negative); find the value of k given the graphs. Experiment with cases and illustrate an explanation of the effects on the graph using technology. Include recognizing even and odd functions from their graphs and algebraic expressions for them.
[FBF3] [MA2013] PRE (912) 25: Compare effects of parameter changes on graphs of transcendental functions. (Alabama)
Subject: Mathematics (9  12)
Title: Exponential Growth and Decay
Description: This lesson on exponential growth and decay involves a variety of teaching resources. There are a variety of websites used to teach and reinforce how to identify exponential growth or decay and how to solve problems relating to growth and decay. There is a lab provided that will help model these concepts being taught and computer based practice on these concepts. Videos are provided that give a picture image of how exponential growth and decay works. This lesson plan was created as a result of the Girls Engaged in Math and Science, GEMS Project funded by the Malone Family Foundation.
Save to ALEX 
Share

Show Details
Title: Density
Description:
Density is the ratio of mass to volume. Density will be introduced to students by a demonstration of coke verses diet coke. The teacher will then solve density problems for the students on the board. The class will then complete a lab on the density of plastics. After lab the students will compare results. Each group will present a Powerpoint presentation of their results.This lesson plan was created as a result of the Girls Engaged in Math and Science, GEMS Project funded by the Malone Family Foundation.
Standard(s): [S1] (8) 1: Identify steps within the scientific process. [S1] CHE (912) 1: Differentiate among pure substances, mixtures, elements, and compounds. [S1] ENV (912) 1: Identify the influence of human population, technology, and cultural and industrial changes on the environment. [MA2013] AL1 (912) 4: Use units as a way to understand problems and to guide the solution of multistep problems; choose and interpret units consistently in formulas; choose and interpret the scale and the origin in graphs and data displays. [NQ1] [MA2013] AL1 (912) 5: Define appropriate quantities for the purpose of descriptive modeling. [NQ2] [MA2013] AL1 (912) 6: Choose a level of accuracy appropriate to limitations on measurement when reporting quantities. [NQ3] [MA2013] AL1 (912) 15: Rearrange formulas to highlight a quantity of interest, using the same reasoning as in solving equations. [ACED4] [MA2013] AL1 (912) 17: Solve linear equations and inequalities in one variable, including equations with coefficients represented by letters. [AREI3] [MA2013] AL1 (912) 28: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity.* [FIF4] [MA2013] AL1 (912) 34: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] ALC (912) 1: Create algebraic models for applicationbased problems by developing and solving equations and inequalities, including those involving direct, inverse, and joint variation. (Alabama) [MA2013] GEO (912) 40: Apply concepts of density based on area and volume in modeling situations (e.g., persons per square mile, British Thermal Units (BTUs) per cubic foot).* [GMG2]
Subject: Mathematics (9  12), or Science (8  12)
Title: Density
Description: Density is the ratio of mass to volume. Density will be introduced to students by a demonstration of coke verses diet coke. The teacher will then solve density problems for the students on the board. The class will then complete a lab on the density of plastics. After lab the students will compare results. Each group will present a Powerpoint presentation of their results.This lesson plan was created as a result of the Girls Engaged in Math and Science, GEMS Project funded by the Malone Family Foundation.
Save to ALEX 
Share

Show Details
Title: What is the slope of the stairs in front of the school?
Description:
The purpose of this lesson is to help students apply the mathematical definition of slope to a concrete example. The students will learn to make the appropriate measurements and apply the formula to calculate the slope of the stairs experimentally.
Standard(s): [MA2013] (8) 7: Graph proportional relationships, interpreting the unit rate as the slope of the graph. Compare two different proportional relationships represented in different ways. [8EE5] [MA2013] (8) 8: Use similar triangles to explain why the slope m is the same between any two distinct points on a nonvertical line in the coordinate plane; derive the equation y = mx for a line through the origin and the equation y = mx + b for a line intercepting the vertical axis at b. [8EE6] [MA2013] (8) 14: Construct a function to model a linear relationship between two quantities. Determine the rate of change and initial value of the function from a description of a relationship or from two (x,y) values, including reading these from a table or from a graph. Interpret the rate of change and initial value of linear function in terms of the situation it models and in terms of its graph or a table of values. [8F4] [MA2013] (8) 15: Describe qualitatively the functional relationship between two quantities by analyzing a graph (e.g., where the function is increasing or decreasing, linear or nonlinear). Sketch a graph that exhibits the qualitative features of a function that has been described verbally. [8F5] [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 46: Interpret the slope (rate of change) and the intercept (constant term) of a linear model in the context of the data. [SID7] [MA2013] ALC (912) 1: Create algebraic models for applicationbased problems by developing and solving equations and inequalities, including those involving direct, inverse, and joint variation. (Alabama) [MA2013] PRE (912) 17: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] GEO (912) 31: Prove the slope criteria for parallel and perpendicular lines, and use them to solve geometric problems (e.g., find the equation of a line parallel or perpendicular to a given line that passes through a given point). [GGPE5]
Subject: Mathematics (8  12)
Title: What is the slope of the stairs in front of the school?
Description: The purpose of this lesson is to help students apply the mathematical definition of slope to a concrete example. The students will learn to make the appropriate measurements and apply the formula to calculate the slope of the stairs experimentally.
Save to ALEX 
Share

Show Details
Title: Marathon Math
Description:
This unit on sequences and series is intended to help students make the connection from math to real life situations. Developing a marathon training program for a beginner runner is one simple way that students may use patterns in real life. The total mileage per week usually creates a pattern over time. Mathematical operations on patterns, sequences, and series enable students to do the calculations necessary for exploring the pattern. Students also explore nutrition information needed for a training program as proper nutrition is an important part of sports training.
Standard(s): [ELA2013] (9) 28: Draw evidence from literary or informational texts to support analysis, reflection, and research. [W.910.9] [ELA2013] (9) 27: Gather relevant information from multiple authoritative print and digital sources, using advanced searches effectively; assess the usefulness of each source in answering the research question; integrate information into the text selectively to maintain the flow of ideas, avoiding plagiarism and following a standard format for citation. [W.910.8] [ELA2013] (9) 26: Conduct short as well as more sustained research projects to answer a question (including a selfgenerated question) or solve a problem; narrow or broaden the inquiry when appropriate; synthesize multiple sources on the subject, demonstrating understanding of the subject under investigation. [W.910.7] [TC2] CA2 (912) 11: Critique digital content for validity, accuracy, bias, currency, and relevance. [ELA] (9) 14: Use the research process to locate, select, retrieve, evaluate, and organize information to support a thesis on a nonliterary topic. [MA2013] DM1 (912) 3: Use the recursive process and difference equations to create fractals, population growth models, sequences, series, and compound interest models. (Alabama) [MA2013] DM1 (912) 2: Determine characteristics of sequences, including the Fibonacci sequence, the triangular numbers, and pentagonal numbers. (Alabama) [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 35: Write arithmetic and geometric sequences both recursively and with an explicit formula, use them to model situations, and translate between the two forms.* [FBF2] [MA2013] AL1 (912) 27: Recognize that sequences are functions, sometimes defined recursively, whose domain is a subset of the integers. [FIF3]
Subject: English Language Arts (9), or English Language Arts (9), or Mathematics (9  12), or Technology Education (9  12)
Title: Marathon Math
Description: This unit on sequences and series is intended to help students make the connection from math to real life situations. Developing a marathon training program for a beginner runner is one simple way that students may use patterns in real life. The total mileage per week usually creates a pattern over time. Mathematical operations on patterns, sequences, and series enable students to do the calculations necessary for exploring the pattern. Students also explore nutrition information needed for a training program as proper nutrition is an important part of sports training.
Thinkfinity Lesson Plans
Save to ALEX 
Share

Show Details
Title: Finding Our Top Speed
Description:
This Illuminations lesson sets the stage for a discussion of travel in the solar system. By considering a realworld, handson activity, students develop their understanding of time and distance. The mathematics necessary for the lesson relate to measuring time and distance as well as graphing to portray the data collected.
Standard(s): [S1] (6) 11: Describe units used to measure distance in space, including astronomical units and light years. [MA2013] (8) 7: Graph proportional relationships, interpreting the unit rate as the slope of the graph. Compare two different proportional relationships represented in different ways. [8EE5] [MA2013] (8) 13: Interpret the equation y = mx + b as defining a linear function whose graph is a straight line; give examples of functions that are not linear. [8F3] [MA2013] (8) 14: Construct a function to model a linear relationship between two quantities. Determine the rate of change and initial value of the function from a description of a relationship or from two (x,y) values, including reading these from a table or from a graph. Interpret the rate of change and initial value of linear function in terms of the situation it models and in terms of its graph or a table of values. [8F4] [MA2013] (8) 15: Describe qualitatively the functional relationship between two quantities by analyzing a graph (e.g., where the function is increasing or decreasing, linear or nonlinear). Sketch a graph that exhibits the qualitative features of a function that has been described verbally. [8F5] [MA2013] (8) 25: Construct and interpret scatter plots for bivariate measurement data to investigate patterns of association between two quantities. Describe patterns such as clustering, outliers, positive or negative association, linear association, and nonlinear association. [8SP1] [MA2013] (8) 26: Know that straight lines are widely used to model relationships between two quantitative variables. For scatter plots that suggest a linear association, informally fit a straight line, and informally assess the model fit by judging the closeness of the data points to the line. [8SP2] [MA2013] AL1 (912) 4: Use units as a way to understand problems and to guide the solution of multistep problems; choose and interpret units consistently in formulas; choose and interpret the scale and the origin in graphs and data displays. [NQ1] [MA2013] AL1 (912) 5: Define appropriate quantities for the purpose of descriptive modeling. [NQ2] [MA2013] AL1 (912) 13: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL1 (912) 28: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity.* [FIF4] [MA2013] AL1 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 31: Graph functions expressed symbolically and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] AL1 (912) 34: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 40: Interpret the parameters in a linear or exponential function in terms of a context. [FLE5] [MA2013] AL1 (912) 45: Represent data on two quantitative variables on a scatter plot, and describe how the variables are related. [SID6] [MA2013] AL1 (912) 46: Interpret the slope (rate of change) and the intercept (constant term) of a linear model in the context of the data. [SID7]
Subject: Mathematics,Science Title: Finding Our Top Speed
Description: This Illuminations lesson sets the stage for a discussion of travel in the solar system. By considering a realworld, handson activity, students develop their understanding of time and distance. The mathematics necessary for the lesson relate to measuring time and distance as well as graphing to portray the data collected. Thinkfinity Partner: Illuminations Grade Span: 6,7,8
Save to ALEX 
Share

Show Details
Title: Apple Pie Recording Chart
Description:
This reproducible activity sheet, from an Illuminations lesson, prompts students to use strings and rulers to measure and record the distance around several round objects, as well as the distance across the middle of those objects.
Standard(s): [MA2013] (6) 1: Understand the concept of a ratio, and use ratio language to describe a ratio relationship between two quantities. [6RP1] [MA2013] (7) 14: Know the formulas for the area and circumference of a circle, and use them to solve problems; give an informal derivation of the relationship between the circumference and area of a circle. [7G4] [MA2013] (7) 17: Understand that statistics can be used to gain information about a population by examining a sample of the population; generalizations about a population from a sample are valid only if the sample is representative of that population. Understand that random sampling tends to produce representative samples and support valid inferences. [7SP1] [MA2013] (7) 20: Use measures of center and measures of variability for numerical data from random samples to draw informal comparative inferences about two populations. [7SP4] [MA2013] (8) 25: Construct and interpret scatter plots for bivariate measurement data to investigate patterns of association between two quantities. Describe patterns such as clustering, outliers, positive or negative association, linear association, and nonlinear association. [8SP1] [MA2013] (8) 26: Know that straight lines are widely used to model relationships between two quantitative variables. For scatter plots that suggest a linear association, informally fit a straight line, and informally assess the model fit by judging the closeness of the data points to the line. [8SP2] [MA2013] (8) 27: Use the equation of a linear model to solve problems in the context of bivariate measurement data, interpreting the slope and intercept. [8SP3] [MA2013] AL1 (912) 13: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL1 (912) 22: Understand that the graph of an equation in two variables is the set of all its solutions plotted in the coordinate plane, often forming a curve (which could be a line). [AREI10] [MA2013] AL1 (912) 28: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity.* [FIF4] [MA2013] AL1 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 31: Graph functions expressed symbolically and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] AL1 (912) 34: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 40: Interpret the parameters in a linear or exponential function in terms of a context. [FLE5] [MA2013] AL1 (912) 46: Interpret the slope (rate of change) and the intercept (constant term) of a linear model in the context of the data. [SID7]
Subject: Mathematics Title: Apple Pie Recording Chart
Description: This reproducible activity sheet, from an Illuminations lesson, prompts students to use strings and rulers to measure and record the distance around several round objects, as well as the distance across the middle of those objects. Thinkfinity Partner: Illuminations Grade Span: 6,7,8
Save to ALEX 
Share

Show Details
Title: Building Bridges
Description:
In this lesson, from Illuminations, students attempt to make a transition from arithmetical to algebraic thinking by extending from problems that have singlesolution responses. Values organized into tables and graphs are used to move toward symbolic representations. Problem situations involving linear, quadratic, and exponential models are employed.
Standard(s): [MA2013] (8) 14: Construct a function to model a linear relationship between two quantities. Determine the rate of change and initial value of the function from a description of a relationship or from two (x,y) values, including reading these from a table or from a graph. Interpret the rate of change and initial value of linear function in terms of the situation it models and in terms of its graph or a table of values. [8F4] [MA2013] (8) 15: Describe qualitatively the functional relationship between two quantities by analyzing a graph (e.g., where the function is increasing or decreasing, linear or nonlinear). Sketch a graph that exhibits the qualitative features of a function that has been described verbally. [8F5] [MA2013] (8) 25: Construct and interpret scatter plots for bivariate measurement data to investigate patterns of association between two quantities. Describe patterns such as clustering, outliers, positive or negative association, linear association, and nonlinear association. [8SP1] [MA2013] (8) 28: Understand that patterns of association can also be seen in bivariate categorical data by displaying frequencies and relative frequencies in a twoway table. Construct and interpret a twoway table summarizing data on two categorical variables collected from the same subjects. Use relative frequencies calculated for rows or columns to describe possible association between the two variables. [8SP4] [MA2013] AL1 (912) 28: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity.* [FIF4] [MA2013] AL1 (912) 31: Graph functions expressed symbolically and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] AL1 (912) 34: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 39: Observe, using graphs and tables, that a quantity increasing exponentially eventually exceeds a quantity increasing linearly, quadratically, or (more generally) as a polynomial function. [FLE3] [MA2013] AL1 (912) 40: Interpret the parameters in a linear or exponential function in terms of a context. [FLE5] [MA2013] AL1 (912) 45: Represent data on two quantitative variables on a scatter plot, and describe how the variables are related. [SID6]
Subject: Mathematics,Professional Development Title: Building Bridges
Description: In this lesson, from Illuminations, students attempt to make a transition from arithmetical to algebraic thinking by extending from problems that have singlesolution responses. Values organized into tables and graphs are used to move toward symbolic representations. Problem situations involving linear, quadratic, and exponential models are employed. Thinkfinity Partner: Illuminations Grade Span: 6,7,8
Save to ALEX 
Share

Show Details
Title: Gallery Walk
Description:
In this lesson, one of a multipart unit from Illuminations, students view the work of other students in the class and explain their own work. Students move from graph to graph during this time and, without any talking, view the work of their classmates. While on their Gallery Walk, the students think about the data their classmates plotted and whether or not the information accompanying each graph seems appropriate. Each pair of students then stands next to their own work and explains one of the graphs.
Standard(s): [MA2013] (8) 7: Graph proportional relationships, interpreting the unit rate as the slope of the graph. Compare two different proportional relationships represented in different ways. [8EE5] [MA2013] (8) 11: Understand that a function is a rule that assigns to each input exactly one output. The graph of a function is the set of ordered pairs consisting of an input and the corresponding output. (Function notation is not required in Grade 8.) [8F1] [MA2013] (8) 12: Compare properties of two functions, each represented in a different way (algebraically, graphically, numerically in tables, or by verbal descriptions). [8F2] [MA2013] (8) 13: Interpret the equation y = mx + b as defining a linear function whose graph is a straight line; give examples of functions that are not linear. [8F3] [MA2013] (8) 14: Construct a function to model a linear relationship between two quantities. Determine the rate of change and initial value of the function from a description of a relationship or from two (x,y) values, including reading these from a table or from a graph. Interpret the rate of change and initial value of linear function in terms of the situation it models and in terms of its graph or a table of values. [8F4] [MA2013] (8) 15: Describe qualitatively the functional relationship between two quantities by analyzing a graph (e.g., where the function is increasing or decreasing, linear or nonlinear). Sketch a graph that exhibits the qualitative features of a function that has been described verbally. [8F5] [MA2013] (8) 25: Construct and interpret scatter plots for bivariate measurement data to investigate patterns of association between two quantities. Describe patterns such as clustering, outliers, positive or negative association, linear association, and nonlinear association. [8SP1] [MA2013] (8) 26: Know that straight lines are widely used to model relationships between two quantitative variables. For scatter plots that suggest a linear association, informally fit a straight line, and informally assess the model fit by judging the closeness of the data points to the line. [8SP2] [MA2013] (8) 27: Use the equation of a linear model to solve problems in the context of bivariate measurement data, interpreting the slope and intercept. [8SP3] [MA2013] AL1 (912) 13: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL1 (912) 22: Understand that the graph of an equation in two variables is the set of all its solutions plotted in the coordinate plane, often forming a curve (which could be a line). [AREI10] [MA2013] AL1 (912) 25: Understand that a function from one set (called the domain) to another set (called the range) assigns to each element of the domain exactly one element of the range. If f is a function and x is an element of its domain, then f(x) denotes the output of f corresponding to the input x. The graph of f is the graph of the equation y = f(x). [FIF1] [MA2013] AL1 (912) 26: Use function notation, evaluate functions for inputs in their domains, and interpret statements that use function notation in terms of a context. [FIF2] [MA2013] AL1 (912) 28: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity.* [FIF4] [MA2013] AL1 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 31: Graph functions expressed symbolically and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] AL1 (912) 34: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 40: Interpret the parameters in a linear or exponential function in terms of a context. [FLE5] [MA2013] AL1 (912) 46: Interpret the slope (rate of change) and the intercept (constant term) of a linear model in the context of the data. [SID7] [MA2013] ALC (912) 12: Create a model of a set of data by estimating the equation of a curve of best fit from tables of values or scatter plots. (Alabama) [MA2013] AL2 (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL2 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] ALT (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] PRE (912) 16: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. (Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity. Determine odd, even, neither.)* [FIF4] (Alabama) [MA2013] ALT (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] PRE (912) 17: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] ALT (912) 33: Write a function that describes a relationship between two quantities.* [FBF1]
Subject: Mathematics Title: Gallery Walk
Description: In this lesson, one of a multipart unit from Illuminations, students view the work of other students in the class and explain their own work. Students move from graph to graph during this time and, without any talking, view the work of their classmates. While on their Gallery Walk, the students think about the data their classmates plotted and whether or not the information accompanying each graph seems appropriate. Each pair of students then stands next to their own work and explains one of the graphs. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: Automobile Mileage: Age vs. Mileage
Description:
In this lesson, one of a multipart unit from Illuminations, students plot data about automobile mileage and interpret the meaning of the slope and yintercept of the least squares regression line. By examining the graphical representation of the data, students analyze the meaning of the slope and yintercept of the line and put those meanings in the context of the reallife application. This lesson incorporates an interactive regression line applet.
Standard(s): [MA2013] (8) 7: Graph proportional relationships, interpreting the unit rate as the slope of the graph. Compare two different proportional relationships represented in different ways. [8EE5] [MA2013] (8) 12: Compare properties of two functions, each represented in a different way (algebraically, graphically, numerically in tables, or by verbal descriptions). [8F2] [MA2013] (8) 14: Construct a function to model a linear relationship between two quantities. Determine the rate of change and initial value of the function from a description of a relationship or from two (x,y) values, including reading these from a table or from a graph. Interpret the rate of change and initial value of linear function in terms of the situation it models and in terms of its graph or a table of values. [8F4] [MA2013] (8) 25: Construct and interpret scatter plots for bivariate measurement data to investigate patterns of association between two quantities. Describe patterns such as clustering, outliers, positive or negative association, linear association, and nonlinear association. [8SP1] [MA2013] (8) 26: Know that straight lines are widely used to model relationships between two quantitative variables. For scatter plots that suggest a linear association, informally fit a straight line, and informally assess the model fit by judging the closeness of the data points to the line. [8SP2] [MA2013] (8) 27: Use the equation of a linear model to solve problems in the context of bivariate measurement data, interpreting the slope and intercept. [8SP3] [MA2013] AL1 (912) 13: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL1 (912) 31: Graph functions expressed symbolically and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] AL1 (912) 32: Write a function defined by an expression in different but equivalent forms to reveal and explain different properties of the function. [FIF8] [MA2013] AL1 (912) 34: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 40: Interpret the parameters in a linear or exponential function in terms of a context. [FLE5] [MA2013] AL1 (912) 41: Represent data with plots on the real number line (dot plots, histograms, and box plots). [SID1] [MA2013] AL1 (912) 45: Represent data on two quantitative variables on a scatter plot, and describe how the variables are related. [SID6] [MA2013] AL1 (912) 46: Interpret the slope (rate of change) and the intercept (constant term) of a linear model in the context of the data. [SID7] [MA2013] PRE (912) 42: Compute (using technology) and interpret the correlation coefficient of a linear fit. [SID8]
Subject: Mathematics Title: Automobile Mileage: Age vs. Mileage
Description: In this lesson, one of a multipart unit from Illuminations, students plot data about automobile mileage and interpret the meaning of the slope and yintercept of the least squares regression line. By examining the graphical representation of the data, students analyze the meaning of the slope and yintercept of the line and put those meanings in the context of the reallife application. This lesson incorporates an interactive regression line applet. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: To Fret or Not to Fret
Description:
In this unit of two lessons, from Illuminations, students explore geometric sequences and exponential functions by considering the placement of frets on stringed instruments. They study the placement of frets on a fretted instrument then use their discoveries to place frets on a fretless instrument.
Standard(s): [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] MI1 (912) 2: Analyze mathematical relationships in music to interpret frequencies of musical notes and to compare mathematical structures of various musical instruments. (Alabama) [MA2013] AL1 (912) 35: Write arithmetic and geometric sequences both recursively and with an explicit formula, use them to model situations, and translate between the two forms.* [FBF2]
Subject: Arts,Mathematics Title: To Fret or Not to Fret
Description: In this unit of two lessons, from Illuminations, students explore geometric sequences and exponential functions by considering the placement of frets on stringed instruments. They study the placement of frets on a fretted instrument then use their discoveries to place frets on a fretless instrument. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: Exploring Measurement, Sequences, and Curves with Stringed Instruments
Description:
In this lesson, one of a multipart unit from Illuminations, students measure lengths on stringed musical instruments. They discuss how the placement of frets on a fretted instrument is determined by a geometric sequence.
Standard(s): [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] MI1 (912) 2: Analyze mathematical relationships in music to interpret frequencies of musical notes and to compare mathematical structures of various musical instruments. (Alabama) [MA2013] AL1 (912) 35: Write arithmetic and geometric sequences both recursively and with an explicit formula, use them to model situations, and translate between the two forms.* [FBF2]
Subject: Arts,Mathematics Title: Exploring Measurement, Sequences, and Curves with Stringed Instruments
Description: In this lesson, one of a multipart unit from Illuminations, students measure lengths on stringed musical instruments. They discuss how the placement of frets on a fretted instrument is determined by a geometric sequence. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: Graphing What
Description:
This reproducible activity sheet, from an Illuminations lesson, is used by students to record independent and dependent variables as well as the function and symbolic function rule for a set of graphs.
Standard(s): [MA2013] (6) 17: Use variables to represent numbers, and write expressions when solving a realworld or mathematical problem; understand that a variable can represent an unknown number or, depending on the purpose at hand, any number in a specified set. [6EE6] [MA2013] (6) 20: Use variables to represent two quantities in a realworld problem that change in relationship to one another; write an equation to express one quantity, thought of as the dependent variable, in terms of the other quantity, thought of as the independent variable. Analyze the relationship between the dependent and independent variables using graphs and tables, and relate these to the equation. [6EE9] [MA2013] (7) 10: Use variables to represent quantities in a realworld or mathematical problem, and construct simple equations and inequalities to solve problems by reasoning about the quantities. [7EE4] [MA2013] (8) 7: Graph proportional relationships, interpreting the unit rate as the slope of the graph. Compare two different proportional relationships represented in different ways. [8EE5] [MA2013] (8) 11: Understand that a function is a rule that assigns to each input exactly one output. The graph of a function is the set of ordered pairs consisting of an input and the corresponding output. (Function notation is not required in Grade 8.) [8F1] [MA2013] (8) 13: Interpret the equation y = mx + b as defining a linear function whose graph is a straight line; give examples of functions that are not linear. [8F3] [MA2013] (8) 14: Construct a function to model a linear relationship between two quantities. Determine the rate of change and initial value of the function from a description of a relationship or from two (x,y) values, including reading these from a table or from a graph. Interpret the rate of change and initial value of linear function in terms of the situation it models and in terms of its graph or a table of values. [8F4] [MA2013] (8) 15: Describe qualitatively the functional relationship between two quantities by analyzing a graph (e.g., where the function is increasing or decreasing, linear or nonlinear). Sketch a graph that exhibits the qualitative features of a function that has been described verbally. [8F5] [MA2013] AL1 (912) 13: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL1 (912) 25: Understand that a function from one set (called the domain) to another set (called the range) assigns to each element of the domain exactly one element of the range. If f is a function and x is an element of its domain, then f(x) denotes the output of f corresponding to the input x. The graph of f is the graph of the equation y = f(x). [FIF1] [MA2013] AL1 (912) 26: Use function notation, evaluate functions for inputs in their domains, and interpret statements that use function notation in terms of a context. [FIF2] [MA2013] AL1 (912) 28: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity.* [FIF4] [MA2013] AL1 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 31: Graph functions expressed symbolically and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] AL1 (912) 34: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 39: Observe, using graphs and tables, that a quantity increasing exponentially eventually exceeds a quantity increasing linearly, quadratically, or (more generally) as a polynomial function. [FLE3] [MA2013] AL2 (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL2 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] AL2 (912) 30: Graph functions expressed symbolically, and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] ALT (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] PRE (912) 16: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. (Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity. Determine odd, even, neither.)* [FIF4] (Alabama) [MA2013] ALT (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] ALT (912) 30: Graph functions expressed symbolically, and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] ALT (912) 33: Write a function that describes a relationship between two quantities.* [FBF1]
Subject: Mathematics Title: Graphing What
Description: This reproducible activity sheet, from an Illuminations lesson, is used by students to record independent and dependent variables as well as the function and symbolic function rule for a set of graphs. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: To Fret or...
Description:
This reproducible activity, from an Illuminations lesson, features questions dealing with measuring distances on fretted stringed instruments.
Standard(s): [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] MI1 (912) 2: Analyze mathematical relationships in music to interpret frequencies of musical notes and to compare mathematical structures of various musical instruments. (Alabama) [MA2013] AL1 (912) 35: Write arithmetic and geometric sequences both recursively and with an explicit formula, use them to model situations, and translate between the two forms.* [FBF2]
Subject: Mathematics Title: To Fret or...
Description: This reproducible activity, from an Illuminations lesson, features questions dealing with measuring distances on fretted stringed instruments. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: Least Squares Regression
Description:
In this ninelesson unit, from Illuminations, students interpret the slope and yintercept of least squares regression lines in the context of reallife data. Students use an interactive applet to plot the data and calculate the correlation coefficient and equation of the least squares regression line. These lessons develop skills in connecting, communicating, reasoning, and problem solving as well as representing fundamental ideas about data.
Standard(s): [MA2013] (8) 14: Construct a function to model a linear relationship between two quantities. Determine the rate of change and initial value of the function from a description of a relationship or from two (x,y) values, including reading these from a table or from a graph. Interpret the rate of change and initial value of linear function in terms of the situation it models and in terms of its graph or a table of values. [8F4] [MA2013] (8) 25: Construct and interpret scatter plots for bivariate measurement data to investigate patterns of association between two quantities. Describe patterns such as clustering, outliers, positive or negative association, linear association, and nonlinear association. [8SP1] [MA2013] (8) 26: Know that straight lines are widely used to model relationships between two quantitative variables. For scatter plots that suggest a linear association, informally fit a straight line, and informally assess the model fit by judging the closeness of the data points to the line. [8SP2] [MA2013] (8) 27: Use the equation of a linear model to solve problems in the context of bivariate measurement data, interpreting the slope and intercept. [8SP3] [MA2013] (8) 28: Understand that patterns of association can also be seen in bivariate categorical data by displaying frequencies and relative frequencies in a twoway table. Construct and interpret a twoway table summarizing data on two categorical variables collected from the same subjects. Use relative frequencies calculated for rows or columns to describe possible association between the two variables. [8SP4] [MA2013] AL1 (912) 13: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL1 (912) 28: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity.* [FIF4] [MA2013] AL1 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 34: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 45: Represent data on two quantitative variables on a scatter plot, and describe how the variables are related. [SID6] [MA2013] AL1 (912) 46: Interpret the slope (rate of change) and the intercept (constant term) of a linear model in the context of the data. [SID7] [MA2013] PRE (912) 42: Compute (using technology) and interpret the correlation coefficient of a linear fit. [SID8] [MA2013] ALC (912) 12: Create a model of a set of data by estimating the equation of a curve of best fit from tables of values or scatter plots. (Alabama) [MA2013] AL2 (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL2 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] ALT (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] ALT (912) 22: Represent constraints by equations or inequalities, and by systems of equations and/or inequalities, and interpret solutions as viable or nonviable options in a modeling context. [ACED3] [MA2013] PRE (912) 16: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. (Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity. Determine odd, even, neither.)* [FIF4] (Alabama) [MA2013] ALT (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] PRE (912) 17: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] ALT (912) 33: Write a function that describes a relationship between two quantities.* [FBF1]
Subject: Mathematics Title: Least Squares Regression
Description: In this ninelesson unit, from Illuminations, students interpret the slope and yintercept of least squares regression lines in the context of reallife data. Students use an interactive applet to plot the data and calculate the correlation coefficient and equation of the least squares regression line. These lessons develop skills in connecting, communicating, reasoning, and problem solving as well as representing fundamental ideas about data. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: Not to Fret
Description:
This reproducible activity sheet, from an Illuminations lesson, presents a line drawing of a guitar's neck showing the location of the nut and the 12th fret. In the lesson, students measure lengths on stringed musical instruments and discuss how the placement of frets on a fretted instrument is determined by a geometric sequence.
Standard(s): [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] MI1 (912) 2: Analyze mathematical relationships in music to interpret frequencies of musical notes and to compare mathematical structures of various musical instruments. (Alabama) [MA2013] AL1 (912) 35: Write arithmetic and geometric sequences both recursively and with an explicit formula, use them to model situations, and translate between the two forms.* [FBF2]
Subject: Arts,Mathematics Title: Not to Fret
Description: This reproducible activity sheet, from an Illuminations lesson, presents a line drawing of a guitar's neck showing the location of the nut and the 12th fret. In the lesson, students measure lengths on stringed musical instruments and discuss how the placement of frets on a fretted instrument is determined by a geometric sequence. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: Graph Chart
Description:
This reproducible transparency, from an Illuminations lesson, contains the answers to the similarly named student activity in which students identify the independent and dependent variables, the function, symbolic function rule and rationale for a set of graphs.
Standard(s): [MA2013] (6) 20: Use variables to represent two quantities in a realworld problem that change in relationship to one another; write an equation to express one quantity, thought of as the dependent variable, in terms of the other quantity, thought of as the independent variable. Analyze the relationship between the dependent and independent variables using graphs and tables, and relate these to the equation. [6EE9] [MA2013] (7) 2: Recognize and represent proportional relationships between quantities. [7RP2] [MA2013] (8) 7: Graph proportional relationships, interpreting the unit rate as the slope of the graph. Compare two different proportional relationships represented in different ways. [8EE5] [MA2013] (8) 11: Understand that a function is a rule that assigns to each input exactly one output. The graph of a function is the set of ordered pairs consisting of an input and the corresponding output. (Function notation is not required in Grade 8.) [8F1] [MA2013] (8) 12: Compare properties of two functions, each represented in a different way (algebraically, graphically, numerically in tables, or by verbal descriptions). [8F2] [MA2013] (8) 13: Interpret the equation y = mx + b as defining a linear function whose graph is a straight line; give examples of functions that are not linear. [8F3] [MA2013] (8) 14: Construct a function to model a linear relationship between two quantities. Determine the rate of change and initial value of the function from a description of a relationship or from two (x,y) values, including reading these from a table or from a graph. Interpret the rate of change and initial value of linear function in terms of the situation it models and in terms of its graph or a table of values. [8F4] [MA2013] (8) 26: Know that straight lines are widely used to model relationships between two quantitative variables. For scatter plots that suggest a linear association, informally fit a straight line, and informally assess the model fit by judging the closeness of the data points to the line. [8SP2] [MA2013] (8) 27: Use the equation of a linear model to solve problems in the context of bivariate measurement data, interpreting the slope and intercept. [8SP3] [MA2013] AL1 (912) 13: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL1 (912) 22: Understand that the graph of an equation in two variables is the set of all its solutions plotted in the coordinate plane, often forming a curve (which could be a line). [AREI10] [MA2013] AL1 (912) 25: Understand that a function from one set (called the domain) to another set (called the range) assigns to each element of the domain exactly one element of the range. If f is a function and x is an element of its domain, then f(x) denotes the output of f corresponding to the input x. The graph of f is the graph of the equation y = f(x). [FIF1] [MA2013] AL1 (912) 26: Use function notation, evaluate functions for inputs in their domains, and interpret statements that use function notation in terms of a context. [FIF2] [MA2013] AL1 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 31: Graph functions expressed symbolically and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] AL1 (912) 32: Write a function defined by an expression in different but equivalent forms to reveal and explain different properties of the function. [FIF8] [MA2013] AL1 (912) 34: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 40: Interpret the parameters in a linear or exponential function in terms of a context. [FLE5] [MA2013] AL1 (912) 45: Represent data on two quantitative variables on a scatter plot, and describe how the variables are related. [SID6] [MA2013] ALC (912) 1: Create algebraic models for applicationbased problems by developing and solving equations and inequalities, including those involving direct, inverse, and joint variation. (Alabama) [MA2013] AL2 (912) 12: Interpret expressions that represent a quantity in terms of its context.* [ASSE1] [MA2013] AL2 (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL2 (912) 30: Graph functions expressed symbolically, and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] ALT (912) 12: Interpret expressions that represent a quantity in terms of its context.* [ASSE1] [MA2013] PRE (912) 16: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. (Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity. Determine odd, even, neither.)* [FIF4] (Alabama) [MA2013] PRE (912) 17: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] ALT (912) 30: Graph functions expressed symbolically, and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] ALT (912) 33: Write a function that describes a relationship between two quantities.* [FBF1]
Subject: Mathematics Title: Graph Chart
Description: This reproducible transparency, from an Illuminations lesson, contains the answers to the similarly named student activity in which students identify the independent and dependent variables, the function, symbolic function rule and rationale for a set of graphs. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: To Fret or Not to Fret
Description:
This reproducible worksheet, from an Illuminations lesson, presents a series of questions related to fretted instruments and geometric sequences. In the lesson, students compare geometric sequences with exponential functions.
Standard(s): [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] MI1 (912) 2: Analyze mathematical relationships in music to interpret frequencies of musical notes and to compare mathematical structures of various musical instruments. (Alabama) [MA2013] AL1 (912) 35: Write arithmetic and geometric sequences both recursively and with an explicit formula, use them to model situations, and translate between the two forms.* [FBF2]
Subject: Arts,Mathematics Title: To Fret or Not to Fret
Description: This reproducible worksheet, from an Illuminations lesson, presents a series of questions related to fretted instruments and geometric sequences. In the lesson, students compare geometric sequences with exponential functions. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: Fretting
Description:
In this lesson, one of a multipart unit from Illuminations, students use their discoveries from the first lesson to place frets on a fretless instrument. They then compare geometric sequences with exponential functions.
Standard(s): [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] MI1 (912) 2: Analyze mathematical relationships in music to interpret frequencies of musical notes and to compare mathematical structures of various musical instruments. (Alabama) [MA2013] AL1 (912) 35: Write arithmetic and geometric sequences both recursively and with an explicit formula, use them to model situations, and translate between the two forms.* [FBF2]
Subject: Arts,Mathematics Title: Fretting
Description: In this lesson, one of a multipart unit from Illuminations, students use their discoveries from the first lesson to place frets on a fretless instrument. They then compare geometric sequences with exponential functions. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: Bathtub Water Levels
Description:
In this lesson, one of a multipart unit from Illuminations, students examine reallife data that illustrates a negative slope. Students interpret the meaning of the negative slope and yintercept of the graph of the reallife data. By examining the graphical representation of the data, students relate the slope and yintercept of the least squares regression line to the reallife data. They also interpret the correlation coefficient of the least squares regression line. This lesson incorporates an interactive regression line applet.
Standard(s): [MA2013] (8) 7: Graph proportional relationships, interpreting the unit rate as the slope of the graph. Compare two different proportional relationships represented in different ways. [8EE5] [MA2013] (8) 14: Construct a function to model a linear relationship between two quantities. Determine the rate of change and initial value of the function from a description of a relationship or from two (x,y) values, including reading these from a table or from a graph. Interpret the rate of change and initial value of linear function in terms of the situation it models and in terms of its graph or a table of values. [8F4] [MA2013] (8) 25: Construct and interpret scatter plots for bivariate measurement data to investigate patterns of association between two quantities. Describe patterns such as clustering, outliers, positive or negative association, linear association, and nonlinear association. [8SP1] [MA2013] (8) 26: Know that straight lines are widely used to model relationships between two quantitative variables. For scatter plots that suggest a linear association, informally fit a straight line, and informally assess the model fit by judging the closeness of the data points to the line. [8SP2] [MA2013] (8) 27: Use the equation of a linear model to solve problems in the context of bivariate measurement data, interpreting the slope and intercept. [8SP3] [MA2013] AL1 (912) 13: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL1 (912) 22: Understand that the graph of an equation in two variables is the set of all its solutions plotted in the coordinate plane, often forming a curve (which could be a line). [AREI10] [MA2013] AL1 (912) 28: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity.* [FIF4] [MA2013] AL1 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 34: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 40: Interpret the parameters in a linear or exponential function in terms of a context. [FLE5] [MA2013] AL1 (912) 45: Represent data on two quantitative variables on a scatter plot, and describe how the variables are related. [SID6] [MA2013] AL1 (912) 46: Interpret the slope (rate of change) and the intercept (constant term) of a linear model in the context of the data. [SID7] [MA2013] PRE (912) 42: Compute (using technology) and interpret the correlation coefficient of a linear fit. [SID8] [MA2013] ALC (912) 12: Create a model of a set of data by estimating the equation of a curve of best fit from tables of values or scatter plots. (Alabama) [MA2013] AL2 (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL2 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] ALT (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] PRE (912) 16: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. (Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity. Determine odd, even, neither.)* [FIF4] (Alabama) [MA2013] ALT (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] PRE (912) 17: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] ALT (912) 33: Write a function that describes a relationship between two quantities.* [FBF1]
Subject: Mathematics Title: Bathtub Water Levels
Description: In this lesson, one of a multipart unit from Illuminations, students examine reallife data that illustrates a negative slope. Students interpret the meaning of the negative slope and yintercept of the graph of the reallife data. By examining the graphical representation of the data, students relate the slope and yintercept of the least squares regression line to the reallife data. They also interpret the correlation coefficient of the least squares regression line. This lesson incorporates an interactive regression line applet. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: Seeing Music, Hearing Waves
Description:
Using this reproducible activity sheet, from an Illuminations lesson, students calculate the frequencies of two octaves of a chromatic musical scale in standard pitch. They then experiment with different combinations of notes and related sine waves to observe why some combinations of musical notes sound harmonious and others have a dissonance.
Standard(s): [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] MI1 (912) 2: Analyze mathematical relationships in music to interpret frequencies of musical notes and to compare mathematical structures of various musical instruments. (Alabama) [MA2013] AL1 (912) 35: Write arithmetic and geometric sequences both recursively and with an explicit formula, use them to model situations, and translate between the two forms.* [FBF2]
Subject: Arts,Mathematics Title: Seeing Music, Hearing Waves
Description: Using this reproducible activity sheet, from an Illuminations lesson, students calculate the frequencies of two octaves of a chromatic musical scale in standard pitch. They then experiment with different combinations of notes and related sine waves to observe why some combinations of musical notes sound harmonious and others have a dissonance. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: Seeing Music, Hearing Waves: Selected Answers and Solutions
Description:
This reproducible teacher sheet, from an Illuminations lesson, provides selected solutions to an activity in which students calculate the frequencies of two octaves of a chromatic musical scale in standard pitch. Students then experiment with different combinations of notes and related sine waves to observe why some combinations of musical notes sound harmonious and others have a dissonance.
Standard(s): [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] MI1 (912) 2: Analyze mathematical relationships in music to interpret frequencies of musical notes and to compare mathematical structures of various musical instruments. (Alabama) [MA2013] AL1 (912) 35: Write arithmetic and geometric sequences both recursively and with an explicit formula, use them to model situations, and translate between the two forms.* [FBF2]
Subject: Arts,Mathematics Title: Seeing Music, Hearing Waves: Selected Answers and Solutions
Description: This reproducible teacher sheet, from an Illuminations lesson, provides selected solutions to an activity in which students calculate the frequencies of two octaves of a chromatic musical scale in standard pitch. Students then experiment with different combinations of notes and related sine waves to observe why some combinations of musical notes sound harmonious and others have a dissonance. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: Seeing Music
Description:
In this Illuminations lesson, students calculate terms of a geometric sequence to determine frequencies of the chromatic scale. They then compare sine waves to see and hear the trigonometry behind harmonious and dissonant note combinations.
Standard(s): [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] MI1 (912) 2: Analyze mathematical relationships in music to interpret frequencies of musical notes and to compare mathematical structures of various musical instruments. (Alabama) [MA2013] AL1 (912) 35: Write arithmetic and geometric sequences both recursively and with an explicit formula, use them to model situations, and translate between the two forms.* [FBF2]
Subject: Arts,Mathematics Title: Seeing Music
Description: In this Illuminations lesson, students calculate terms of a geometric sequence to determine frequencies of the chromatic scale. They then compare sine waves to see and hear the trigonometry behind harmonious and dissonant note combinations. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: The Effects of Outliers
Description:
This lesson, one of a multipart unit from Illuminations, provides students with the opportunity to investigate the relationship between a set of data points and a curve used to fit the data points, using a computerbased interactive tool. Using the Regression Line Applet, students investigate the effect of outliers on a regression line and easily see their significance.
Standard(s): [MA2013] (8) 25: Construct and interpret scatter plots for bivariate measurement data to investigate patterns of association between two quantities. Describe patterns such as clustering, outliers, positive or negative association, linear association, and nonlinear association. [8SP1] [MA2013] (8) 26: Know that straight lines are widely used to model relationships between two quantitative variables. For scatter plots that suggest a linear association, informally fit a straight line, and informally assess the model fit by judging the closeness of the data points to the line. [8SP2] [MA2013] (8) 28: Understand that patterns of association can also be seen in bivariate categorical data by displaying frequencies and relative frequencies in a twoway table. Construct and interpret a twoway table summarizing data on two categorical variables collected from the same subjects. Use relative frequencies calculated for rows or columns to describe possible association between the two variables. [8SP4] [MA2013] AL1 (912) 13: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL1 (912) 28: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity.* [FIF4] [MA2013] AL1 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 34: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 40: Interpret the parameters in a linear or exponential function in terms of a context. [FLE5] [MA2013] AL1 (912) 43: Interpret differences in shape, center, and spread in the context of the data sets, accounting for possible effects of extreme data points (outliers). [SID3] [MA2013] AL1 (912) 45: Represent data on two quantitative variables on a scatter plot, and describe how the variables are related. [SID6] [MA2013] AL1 (912) 46: Interpret the slope (rate of change) and the intercept (constant term) of a linear model in the context of the data. [SID7] [MA2013] PRE (912) 42: Compute (using technology) and interpret the correlation coefficient of a linear fit. [SID8] [MA2013] ALC (912) 12: Create a model of a set of data by estimating the equation of a curve of best fit from tables of values or scatter plots. (Alabama) [MA2013] AL2 (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL2 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] ALT (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] PRE (912) 16: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. (Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity. Determine odd, even, neither.)* [FIF4] (Alabama) [MA2013] ALT (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] PRE (912) 17: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] ALT (912) 33: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] PRE (912) 44: Understand statistics as a process for making inferences about population parameters based on a random sample from that population. [SIC1]
Subject: Mathematics Title: The Effects of Outliers
Description: This lesson, one of a multipart unit from Illuminations, provides students with the opportunity to investigate the relationship between a set of data points and a curve used to fit the data points, using a computerbased interactive tool. Using the Regression Line Applet, students investigate the effect of outliers on a regression line and easily see their significance. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: Traveling Distances
Description:
In this lesson, one of a multipart unit from Illuminations, students interpret the meaning of the slope and yintercept of a graph of reallife data. By examining the graphical representation of the data, students relate the slope and yintercept of the least squares regression line to the reallife data. They also interpret the correlation coefficient of the resulting least squares regression line. This lesson incorporates an interactive regression line applet.
Standard(s): [MA2013] (8) 25: Construct and interpret scatter plots for bivariate measurement data to investigate patterns of association between two quantities. Describe patterns such as clustering, outliers, positive or negative association, linear association, and nonlinear association. [8SP1] [MA2013] (8) 26: Know that straight lines are widely used to model relationships between two quantitative variables. For scatter plots that suggest a linear association, informally fit a straight line, and informally assess the model fit by judging the closeness of the data points to the line. [8SP2] [MA2013] (8) 27: Use the equation of a linear model to solve problems in the context of bivariate measurement data, interpreting the slope and intercept. [8SP3] [MA2013] (8) 28: Understand that patterns of association can also be seen in bivariate categorical data by displaying frequencies and relative frequencies in a twoway table. Construct and interpret a twoway table summarizing data on two categorical variables collected from the same subjects. Use relative frequencies calculated for rows or columns to describe possible association between the two variables. [8SP4] [MA2013] AL1 (912) 13: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL1 (912) 28: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity.* [FIF4] [MA2013] AL1 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 34: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 45: Represent data on two quantitative variables on a scatter plot, and describe how the variables are related. [SID6] [MA2013] AL1 (912) 46: Interpret the slope (rate of change) and the intercept (constant term) of a linear model in the context of the data. [SID7] [MA2013] PRE (912) 42: Compute (using technology) and interpret the correlation coefficient of a linear fit. [SID8] [MA2013] ALC (912) 12: Create a model of a set of data by estimating the equation of a curve of best fit from tables of values or scatter plots. (Alabama) [MA2013] AL2 (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL2 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] ALT (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] PRE (912) 16: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. (Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity. Determine odd, even, neither.)* [FIF4] (Alabama) [MA2013] ALT (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] PRE (912) 17: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] ALT (912) 33: Write a function that describes a relationship between two quantities.* [FBF1]
Subject: Mathematics Title: Traveling Distances
Description: In this lesson, one of a multipart unit from Illuminations, students interpret the meaning of the slope and yintercept of a graph of reallife data. By examining the graphical representation of the data, students relate the slope and yintercept of the least squares regression line to the reallife data. They also interpret the correlation coefficient of the resulting least squares regression line. This lesson incorporates an interactive regression line applet. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: Automobile Mileage: Comparing and Contrasting
Description:
In this lesson, one of a multipart unit from Illuminations, students compare and contrast their findings from previous lessons of the unit. This lesson allows students the time they need to think about and discuss what they have done in the previous lessons. This lesson provides the teacher with another opportunity to listen to student discourse and assess student understanding.
Standard(s): [MA2013] (8) 7: Graph proportional relationships, interpreting the unit rate as the slope of the graph. Compare two different proportional relationships represented in different ways. [8EE5] [MA2013] (8) 14: Construct a function to model a linear relationship between two quantities. Determine the rate of change and initial value of the function from a description of a relationship or from two (x,y) values, including reading these from a table or from a graph. Interpret the rate of change and initial value of linear function in terms of the situation it models and in terms of its graph or a table of values. [8F4] [MA2013] (8) 25: Construct and interpret scatter plots for bivariate measurement data to investigate patterns of association between two quantities. Describe patterns such as clustering, outliers, positive or negative association, linear association, and nonlinear association. [8SP1] [MA2013] (8) 26: Know that straight lines are widely used to model relationships between two quantitative variables. For scatter plots that suggest a linear association, informally fit a straight line, and informally assess the model fit by judging the closeness of the data points to the line. [8SP2] [MA2013] (8) 27: Use the equation of a linear model to solve problems in the context of bivariate measurement data, interpreting the slope and intercept. [8SP3] [MA2013] AL1 (912) 13: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL1 (912) 22: Understand that the graph of an equation in two variables is the set of all its solutions plotted in the coordinate plane, often forming a curve (which could be a line). [AREI10] [MA2013] AL1 (912) 28: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity.* [FIF4] [MA2013] AL1 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 31: Graph functions expressed symbolically and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] AL1 (912) 34: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 40: Interpret the parameters in a linear or exponential function in terms of a context. [FLE5] [MA2013] AL1 (912) 45: Represent data on two quantitative variables on a scatter plot, and describe how the variables are related. [SID6] [MA2013] AL1 (912) 46: Interpret the slope (rate of change) and the intercept (constant term) of a linear model in the context of the data. [SID7] [MA2013] PRE (912) 42: Compute (using technology) and interpret the correlation coefficient of a linear fit. [SID8] [MA2013] ALC (912) 12: Create a model of a set of data by estimating the equation of a curve of best fit from tables of values or scatter plots. (Alabama) [MA2013] AL2 (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL2 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] ALT (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] PRE (912) 16: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. (Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity. Determine odd, even, neither.)* [FIF4] (Alabama) [MA2013] ALT (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] PRE (912) 17: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] ALT (912) 33: Write a function that describes a relationship between two quantities.* [FBF1]
Subject: Mathematics Title: Automobile Mileage: Comparing and Contrasting
Description: In this lesson, one of a multipart unit from Illuminations, students compare and contrast their findings from previous lessons of the unit. This lesson allows students the time they need to think about and discuss what they have done in the previous lessons. This lesson provides the teacher with another opportunity to listen to student discourse and assess student understanding. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: Hearing Music, Seeing Waves
Description:
This reproducible preactivity sheet, from an Illuminations lesson, presents summary questions about the mathematics of music, specifically focused on sine waves and the geometric sequences of notes that are an octave apart.
Standard(s): [MA2013] AL1 (912) 27: Recognize that sequences are functions, sometimes defined recursively, whose domain is a subset of the integers. [FIF3] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] ALT (912) 38: Explain how the unit circle in the coordinate plane enables the extension of trigonometric functions to all real numbers, interpreted as radian measures of angles traversed counterclockwise around the unit circle. [FTF2] [MA2013] ALT (912) 40: Choose trigonometric functions to model periodic phenomena with specified amplitude, frequency, and midline.* [FTF5] [MA2013] AL1 (912) 35: Write arithmetic and geometric sequences both recursively and with an explicit formula, use them to model situations, and translate between the two forms.* [FBF2]
Subject: Arts,Mathematics Title: Hearing Music, Seeing Waves
Description: This reproducible preactivity sheet, from an Illuminations lesson, presents summary questions about the mathematics of music, specifically focused on sine waves and the geometric sequences of notes that are an octave apart. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: Linear Alignment
Description:
In this Illuminations lesson, students explore linear equations and the effects of changing the slope and yintercept on a line. It gives students exposure to y = mx + b, and can be used as an introduction to the topic. Using graphing calculators, students are challenged to overlap lines onto the sides of polygons. To achieve this goal, students change slopes and yintercepts of lines, noting observations about behavior as they work. As students change the yintercept of a line, they see it raise or lower the line. As students change the slope, they see it affect the steepness of the line.
Standard(s): [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 31: Graph functions expressed symbolically and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] AL1 (912) 36: Identify the effect on the graph of replacing f(x) by f(x) + k, k f(x), f(kx), and f(x + k) for specific values of k (both positive and negative); find the value of k given the graphs. Experiment with cases and illustrate an explanation of the effects on the graph using technology. Include recognizing even and odd functions from their graphs and algebraic expressions for them. [FBF3] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 40: Interpret the parameters in a linear or exponential function in terms of a context. [FLE5] [MA2013] AL1 (912) 46: Interpret the slope (rate of change) and the intercept (constant term) of a linear model in the context of the data. [SID7]
Subject: Mathematics Title: Linear Alignment
Description: In this Illuminations lesson, students explore linear equations and the effects of changing the slope and yintercept on a line. It gives students exposure to y = mx + b, and can be used as an introduction to the topic. Using graphing calculators, students are challenged to overlap lines onto the sides of polygons. To achieve this goal, students change slopes and yintercepts of lines, noting observations about behavior as they work. As students change the yintercept of a line, they see it raise or lower the line. As students change the slope, they see it affect the steepness of the line. Thinkfinity Partner: Illuminations Grade Span: 6,7,8,9,10,11,12
Save to ALEX 
Share

Show Details
Title: Make a Conjecture
Description:
In this lesson, one of a multipart unit from Illuminations, students explore rates of change and accumulation in context. They are asked to think about the mathematics involved in determining the amount of blood being pumped by a heart.
Standard(s): [MA2013] AL1 (912) 4: Use units as a way to understand problems and to guide the solution of multistep problems; choose and interpret units consistently in formulas; choose and interpret the scale and the origin in graphs and data displays. [NQ1] [MA2013] AL1 (912) 5: Define appropriate quantities for the purpose of descriptive modeling. [NQ2] [MA2013] AL1 (912) 6: Choose a level of accuracy appropriate to limitations on measurement when reporting quantities. [NQ3] [MA2013] AL1 (912) 12: Create equations and inequalities in one variable, and use them to solve problems. Include equations arising from linear and quadratic functions, and simple rational and exponential functions. [ACED1] [MA2013] AL1 (912) 13: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL1 (912) 14: Represent constraints by equations or inequalities, and by systems of equations and/or inequalities and interpret solutions as viable or nonviable options in a modeling context. [ACED3] [MA2013] AL1 (912) 28: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity.* [FIF4] [MA2013] AL1 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 31: Graph functions expressed symbolically and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] AL1 (912) 32: Write a function defined by an expression in different but equivalent forms to reveal and explain different properties of the function. [FIF8] [MA2013] AL1 (912) 34: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 39: Observe, using graphs and tables, that a quantity increasing exponentially eventually exceeds a quantity increasing linearly, quadratically, or (more generally) as a polynomial function. [FLE3] [MA2013] AL1 (912) 40: Interpret the parameters in a linear or exponential function in terms of a context. [FLE5] [MA2013] AL1 (912) 41: Represent data with plots on the real number line (dot plots, histograms, and box plots). [SID1] [MA2013] AL1 (912) 42: Use statistics appropriate to the shape of the data distribution to compare center (median, mean) and spread (interquartile range, standard deviation) of two or more different data sets. [SID2] [MA2013] AL1 (912) 45: Represent data on two quantitative variables on a scatter plot, and describe how the variables are related. [SID6] [MA2013] ALC (912) 3: Use formulas or equations of functions to calculate outcomes of exponential growth or decay. (Alabama) [MA2013] ALC (912) 5: Determine approximate rates of change of nonlinear relationships from graphical and numerical data. (Alabama) [MA2013] ALC (912) 12: Create a model of a set of data by estimating the equation of a curve of best fit from tables of values or scatter plots. (Alabama) [MA2013] AL2 (912) 12: Interpret expressions that represent a quantity in terms of its context.* [ASSE1] [MA2013] AL2 (912) 20: Create equations and inequalities in one variable and use them to solve problems. Include equations arising from linear and quadratic functions, and simple rational and exponential functions. [ACED1] [MA2013] AL2 (912) 22: Represent constraints by equations or inequalities, and by systems of equations and/or inequalities, and interpret solutions as viable or nonviable options in a modeling context. [ACED3] [MA2013] AL2 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] AL2 (912) 30: Graph functions expressed symbolically, and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] AL2 (912) 37: (+) Use probabilities to make fair decisions (e.g., drawing by lots, using a random number generator). [SMD6] [MA2013] AL2 (912) 38: (+) Analyze decisions and strategies using probability concepts (e.g., product testing, medical testing, pulling a hockey goalie at the end of a game). [SMD7] [MA2013] ALT (912) 12: Interpret expressions that represent a quantity in terms of its context.* [ASSE1] [MA2013] ALT (912) 20: Create equations and inequalities in one variable and use them to solve problems. Include equations arising from linear and quadratic functions, and simple rational and exponential functions. [ACED1] [MA2013] ALT (912) 22: Represent constraints by equations or inequalities, and by systems of equations and/or inequalities, and interpret solutions as viable or nonviable options in a modeling context. [ACED3] [MA2013] PRE (912) 16: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. (Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity. Determine odd, even, neither.)* [FIF4] (Alabama) [MA2013] ALT (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] PRE (912) 17: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] ALT (912) 30: Graph functions expressed symbolically, and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] ALT (912) 33: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] ALT (912) 37: Use the mean and standard deviation of a data set to fit it to a normal distribution and to estimate population percentages. Recognize that there are data sets for which such a procedure is not appropriate. Use calculators, spreadsheets, and tables to estimate areas under the normal curve. [SID4] [MA2013] PRE (912) 44: Understand statistics as a process for making inferences about population parameters based on a random sample from that population. [SIC1] [MA2013] PRE (912) 45: Decide if a specified model is consistent with results from a given datagenerating process, e.g., using simulation. [SIC2] [MA2013] PRE (912) 46: Recognize the purposes of and differences among sample surveys, experiments, and observational studies; explain how randomization relates to each. [SIC3] [MA2013] PRE (912) 49: Evaluate reports based on data. [SIC6] [MA2013] ALT (912) 41: (+) Use probabilities to make fair decisions (e.g., drawing by lots, using a random number generator). [SMD6] [MA2013] ALT (912) 42: (+) Analyze decisions and strategies using probability concepts (e.g., product testing, medical testing, pulling a hockey goalie at the end of a game). [SMD7] [MA2013] AL1 (912) 35: Write arithmetic and geometric sequences both recursively and with an explicit formula, use them to model situations, and translate between the two forms.* [FBF2]
Subject: Health,Mathematics Title: Make a Conjecture
Description: In this lesson, one of a multipart unit from Illuminations, students explore rates of change and accumulation in context. They are asked to think about the mathematics involved in determining the amount of blood being pumped by a heart. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: Exact Ratio
Description:
This reproducible activity sheet, from an Illuminations lesson, features a series of questions pertaining to exact ratios and geometric sequences. In the lesson, students measure lengths on stringed musical instruments and discuss how the placement of frets on a fretted instrument is determined by a geometric sequence.
Standard(s): [MA2013] AL1 (912) 2: Rewrite expressions involving radicals and rational exponents using the properties of exponents. [NRN2] [MA2013] AL1 (912) 28: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity.* [FIF4] [MA2013] AL1 (912) 31: Graph functions expressed symbolically and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] AL1 (912) 32: Write a function defined by an expression in different but equivalent forms to reveal and explain different properties of the function. [FIF8] [MA2013] AL1 (912) 33: Compare properties of two functions each represented in a different way (algebraically, graphically, numerically in tables, or by verbal descriptions). [FIF9] [MA2013] AL1 (912) 34: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 39: Observe, using graphs and tables, that a quantity increasing exponentially eventually exceeds a quantity increasing linearly, quadratically, or (more generally) as a polynomial function. [FLE3] [MA2013] AL1 (912) 45: Represent data on two quantitative variables on a scatter plot, and describe how the variables are related. [SID6] [MA2013] ALC (912) 3: Use formulas or equations of functions to calculate outcomes of exponential growth or decay. (Alabama) [MA2013] ALC (912) 12: Create a model of a set of data by estimating the equation of a curve of best fit from tables of values or scatter plots. (Alabama) [MA2013] AL2 (912) 12: Interpret expressions that represent a quantity in terms of its context.* [ASSE1] [MA2013] AL2 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] AL2 (912) 30: Graph functions expressed symbolically, and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] AL2 (912) 34: Identify the effect on the graph of replacing f(x) by f(x) + k, k f(x), f(kx), and f(x + k) for specific values of k (both positive and negative); find the value of k given the graphs. Experiment with cases and illustrate an explanation of the effects on the graph using technology. Include recognizing even and odd functions from their graphs and algebraic expressions for them.
[FBF3] [MA2013] PRE (912) 16: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. (Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity. Determine odd, even, neither.)* [FIF4] (Alabama) [MA2013] ALT (912) 30: Graph functions expressed symbolically, and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] ALT (912) 33: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] AL1 (912) 35: Write arithmetic and geometric sequences both recursively and with an explicit formula, use them to model situations, and translate between the two forms.* [FBF2]
Subject: Mathematics Title: Exact Ratio
Description: This reproducible activity sheet, from an Illuminations lesson, features a series of questions pertaining to exact ratios and geometric sequences. In the lesson, students measure lengths on stringed musical instruments and discuss how the placement of frets on a fretted instrument is determined by a geometric sequence. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Web Resources
Interactives/Games
Save to ALEX 
Share

Show Details
Title: Graphing Exponential Functions
Description:
This interactive graph lets students explore the different aspects of exponential graphs.
Standard(s): [MA2013] AL1 (912) 9: Choose and produce an equivalent form of an expression to reveal and explain properties of the quantity represented by the expression.* [ASSE3] [MA2013] AL1 (912) 12: Create equations and inequalities in one variable, and use them to solve problems. Include equations arising from linear and quadratic functions, and simple rational and exponential functions. [ACED1] [MA2013] AL1 (912) 32: Write a function defined by an expression in different but equivalent forms to reveal and explain different properties of the function. [FIF8] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL2 (912) 20: Create equations and inequalities in one variable and use them to solve problems. Include equations arising from linear and quadratic functions, and simple rational and exponential functions. [ACED1] [MA2013] AL2 (912) 27: Explain why the xcoordinates of the points where the graphs of the equations y = f(x) and y = g(x) intersect are the solutions of the equation f(x) = g(x); find the solutions approximately, e.g., using technology to graph the functions, make tables of values, or find successive approximations. Include cases where f(x) and/or g(x) are linear, polynomial, rational, absolute value, exponential, and logarithmic functions.* [AREI11] [MA2013] AL2 (912) 34: Identify the effect on the graph of replacing f(x) by f(x) + k, k f(x), f(kx), and f(x + k) for specific values of k (both positive and negative); find the value of k given the graphs. Experiment with cases and illustrate an explanation of the effects on the graph using technology. Include recognizing even and odd functions from their graphs and algebraic expressions for them.
[FBF3] [MA2013] ALT (912) 20: Create equations and inequalities in one variable and use them to solve problems. Include equations arising from linear and quadratic functions, and simple rational and exponential functions. [ACED1] [MA2013] ALT (912) 27: Explain why the xcoordinates of the points where the graphs of the equations y = f(x) and y = g(x) intersect are the solutions of the equation f(x) = g(x); find the solutions approximately, e.g., using technology to graph the functions, make tables of values, or find successive approximations. Include cases where f(x) and/or g(x) are linear, polynomial, rational, absolute value, exponential, and logarithmic functions.* [AREI11]
Graphing Exponential Functions
http://www.softschoo...
This interactive graph lets students explore the different aspects of exponential graphs.
Learning Activities
Save to ALEX 
Share

Show Details
Title: Graphing Exponential Functions
Description:
This interactive graph lets students explore the different aspects of exponential graphs.
Standard(s): [MA2013] AL1 (912) 9: Choose and produce an equivalent form of an expression to reveal and explain properties of the quantity represented by the expression.* [ASSE3] [MA2013] AL1 (912) 12: Create equations and inequalities in one variable, and use them to solve problems. Include equations arising from linear and quadratic functions, and simple rational and exponential functions. [ACED1] [MA2013] AL1 (912) 32: Write a function defined by an expression in different but equivalent forms to reveal and explain different properties of the function. [FIF8] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL2 (912) 20: Create equations and inequalities in one variable and use them to solve problems. Include equations arising from linear and quadratic functions, and simple rational and exponential functions. [ACED1] [MA2013] AL2 (912) 27: Explain why the xcoordinates of the points where the graphs of the equations y = f(x) and y = g(x) intersect are the solutions of the equation f(x) = g(x); find the solutions approximately, e.g., using technology to graph the functions, make tables of values, or find successive approximations. Include cases where f(x) and/or g(x) are linear, polynomial, rational, absolute value, exponential, and logarithmic functions.* [AREI11] [MA2013] AL2 (912) 34: Identify the effect on the graph of replacing f(x) by f(x) + k, k f(x), f(kx), and f(x + k) for specific values of k (both positive and negative); find the value of k given the graphs. Experiment with cases and illustrate an explanation of the effects on the graph using technology. Include recognizing even and odd functions from their graphs and algebraic expressions for them.
[FBF3] [MA2013] ALT (912) 20: Create equations and inequalities in one variable and use them to solve problems. Include equations arising from linear and quadratic functions, and simple rational and exponential functions. [ACED1] [MA2013] ALT (912) 27: Explain why the xcoordinates of the points where the graphs of the equations y = f(x) and y = g(x) intersect are the solutions of the equation f(x) = g(x); find the solutions approximately, e.g., using technology to graph the functions, make tables of values, or find successive approximations. Include cases where f(x) and/or g(x) are linear, polynomial, rational, absolute value, exponential, and logarithmic functions.* [AREI11]
Graphing Exponential Functions
http://www.softschoo...
This interactive graph lets students explore the different aspects of exponential graphs.
Thinkfinity Learning Activities
Save to ALEX 
Share

Show Details
Title: Flowing Through Mathematics
Description:
This student interactive, from Illuminations, simulates water flowing from a tube through a hole in the bottom. The diameter of the hole can be adjusted and data can be gathered for the height or volume of water in the tube at any time.
Standard(s): [MA2013] AL1 (912) 13: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL1 (912) 28: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity.* [FIF4] [MA2013] AL1 (912) 31: Graph functions expressed symbolically and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] AL1 (912) 32: Write a function defined by an expression in different but equivalent forms to reveal and explain different properties of the function. [FIF8] [MA2013] AL1 (912) 34: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] GEO (912) 36: Use volume formulas for cylinders, pyramids, cones, and spheres to solve problems.* [GGMD3] [MA2013] GEO (912) 39: Use geometric shapes, their measures, and their properties to describe objects (e.g., modeling a tree trunk or a human torso as a cylinder).* [GMG1] [MA2013] GEO (912) 40: Apply concepts of density based on area and volume in modeling situations (e.g., persons per square mile, British Thermal Units (BTUs) per cubic foot).* [GMG2] [MA2013] ALC (912) 3: Use formulas or equations of functions to calculate outcomes of exponential growth or decay. (Alabama) [MA2013] ALC (912) 12: Create a model of a set of data by estimating the equation of a curve of best fit from tables of values or scatter plots. (Alabama)
Subject: Mathematics Title: Flowing Through Mathematics
Description: This student interactive, from Illuminations, simulates water flowing from a tube through a hole in the bottom. The diameter of the hole can be adjusted and data can be gathered for the height or volume of water in the tube at any time. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12

