ALEX Lesson Plans
Save to ALEX 
Share

Show Details
Title: Investigating School Safety and Slope
Description:
Using a 'news report' approach, students investigate the slope of various stairways on the school campus and report on wheelchair accessibility and adherence to the Americans with Disabilities Act. (PowerPoint Included) An extension of this lesson includes the critique/design of existing/nonexistent ramps.This lesson plan was created as a result of the Girls Engaged in Math and Science, GEMS Project funded by the Malone Family Foundation.
Standard(s): [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 46: Interpret the slope (rate of change) and the intercept (constant term) of a linear model in the context of the data. [SID7] [MA2013] ALC (912) 1: Create algebraic models for applicationbased problems by developing and solving equations and inequalities, including those involving direct, inverse, and joint variation. (Alabama) [MA2013] PRE (912) 17: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] (8) 14: Construct a function to model a linear relationship between two quantities. Determine the rate of change and initial value of the function from a description of a relationship or from two (x,y) values, including reading these from a table or from a graph. Interpret the rate of change and initial value of linear function in terms of the situation it models and in terms of its graph or a table of values. [8F4]
Subject: Mathematics (8  12)
Title: Investigating School Safety and Slope
Description: Using a 'news report' approach, students investigate the slope of various stairways on the school campus and report on wheelchair accessibility and adherence to the Americans with Disabilities Act. (PowerPoint Included) An extension of this lesson includes the critique/design of existing/nonexistent ramps.This lesson plan was created as a result of the Girls Engaged in Math and Science, GEMS Project funded by the Malone Family Foundation.
Save to ALEX 
Share

Show Details
Title: What is the slope of the stairs in front of the school?
Description:
The purpose of this lesson is to help students apply the mathematical definition of slope to a concrete example. The students will learn to make the appropriate measurements and apply the formula to calculate the slope of the stairs experimentally.
Standard(s): [MA2013] (8) 7: Graph proportional relationships, interpreting the unit rate as the slope of the graph. Compare two different proportional relationships represented in different ways. [8EE5] [MA2013] (8) 8: Use similar triangles to explain why the slope m is the same between any two distinct points on a nonvertical line in the coordinate plane; derive the equation y = mx for a line through the origin and the equation y = mx + b for a line intercepting the vertical axis at b. [8EE6] [MA2013] (8) 14: Construct a function to model a linear relationship between two quantities. Determine the rate of change and initial value of the function from a description of a relationship or from two (x,y) values, including reading these from a table or from a graph. Interpret the rate of change and initial value of linear function in terms of the situation it models and in terms of its graph or a table of values. [8F4] [MA2013] (8) 15: Describe qualitatively the functional relationship between two quantities by analyzing a graph (e.g., where the function is increasing or decreasing, linear or nonlinear). Sketch a graph that exhibits the qualitative features of a function that has been described verbally. [8F5] [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 46: Interpret the slope (rate of change) and the intercept (constant term) of a linear model in the context of the data. [SID7] [MA2013] ALC (912) 1: Create algebraic models for applicationbased problems by developing and solving equations and inequalities, including those involving direct, inverse, and joint variation. (Alabama) [MA2013] PRE (912) 17: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] GEO (912) 31: Prove the slope criteria for parallel and perpendicular lines, and use them to solve geometric problems (e.g., find the equation of a line parallel or perpendicular to a given line that passes through a given point). [GGPE5]
Subject: Mathematics (8  12)
Title: What is the slope of the stairs in front of the school?
Description: The purpose of this lesson is to help students apply the mathematical definition of slope to a concrete example. The students will learn to make the appropriate measurements and apply the formula to calculate the slope of the stairs experimentally.
Thinkfinity Lesson Plans
Save to ALEX 
Share

Show Details
Title: Make a Conjecture
Description:
In this lesson, one of a multipart unit from Illuminations, students explore rates of change and accumulation in context. They are asked to think about the mathematics involved in determining the amount of blood being pumped by a heart.
Standard(s): [MA2013] AL1 (912) 4: Use units as a way to understand problems and to guide the solution of multistep problems; choose and interpret units consistently in formulas; choose and interpret the scale and the origin in graphs and data displays. [NQ1] [MA2013] AL1 (912) 5: Define appropriate quantities for the purpose of descriptive modeling. [NQ2] [MA2013] AL1 (912) 6: Choose a level of accuracy appropriate to limitations on measurement when reporting quantities. [NQ3] [MA2013] AL1 (912) 12: Create equations and inequalities in one variable, and use them to solve problems. Include equations arising from linear and quadratic functions, and simple rational and exponential functions. [ACED1] [MA2013] AL1 (912) 13: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL1 (912) 14: Represent constraints by equations or inequalities, and by systems of equations and/or inequalities and interpret solutions as viable or nonviable options in a modeling context. [ACED3] [MA2013] AL1 (912) 28: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity.* [FIF4] [MA2013] AL1 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 31: Graph functions expressed symbolically and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] AL1 (912) 32: Write a function defined by an expression in different but equivalent forms to reveal and explain different properties of the function. [FIF8] [MA2013] AL1 (912) 34: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 39: Observe, using graphs and tables, that a quantity increasing exponentially eventually exceeds a quantity increasing linearly, quadratically, or (more generally) as a polynomial function. [FLE3] [MA2013] AL1 (912) 40: Interpret the parameters in a linear or exponential function in terms of a context. [FLE5] [MA2013] AL1 (912) 41: Represent data with plots on the real number line (dot plots, histograms, and box plots). [SID1] [MA2013] AL1 (912) 42: Use statistics appropriate to the shape of the data distribution to compare center (median, mean) and spread (interquartile range, standard deviation) of two or more different data sets. [SID2] [MA2013] AL1 (912) 45: Represent data on two quantitative variables on a scatter plot, and describe how the variables are related. [SID6] [MA2013] ALC (912) 3: Use formulas or equations of functions to calculate outcomes of exponential growth or decay. (Alabama) [MA2013] ALC (912) 5: Determine approximate rates of change of nonlinear relationships from graphical and numerical data. (Alabama) [MA2013] ALC (912) 12: Create a model of a set of data by estimating the equation of a curve of best fit from tables of values or scatter plots. (Alabama) [MA2013] AL2 (912) 12: Interpret expressions that represent a quantity in terms of its context.* [ASSE1] [MA2013] AL2 (912) 20: Create equations and inequalities in one variable and use them to solve problems. Include equations arising from linear and quadratic functions, and simple rational and exponential functions. [ACED1] [MA2013] AL2 (912) 22: Represent constraints by equations or inequalities, and by systems of equations and/or inequalities, and interpret solutions as viable or nonviable options in a modeling context. [ACED3] [MA2013] AL2 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] AL2 (912) 30: Graph functions expressed symbolically, and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] AL2 (912) 37: (+) Use probabilities to make fair decisions (e.g., drawing by lots, using a random number generator). [SMD6] [MA2013] AL2 (912) 38: (+) Analyze decisions and strategies using probability concepts (e.g., product testing, medical testing, pulling a hockey goalie at the end of a game). [SMD7] [MA2013] ALT (912) 12: Interpret expressions that represent a quantity in terms of its context.* [ASSE1] [MA2013] ALT (912) 20: Create equations and inequalities in one variable and use them to solve problems. Include equations arising from linear and quadratic functions, and simple rational and exponential functions. [ACED1] [MA2013] ALT (912) 22: Represent constraints by equations or inequalities, and by systems of equations and/or inequalities, and interpret solutions as viable or nonviable options in a modeling context. [ACED3] [MA2013] PRE (912) 16: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. (Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity. Determine odd, even, neither.)* [FIF4] (Alabama) [MA2013] ALT (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] PRE (912) 17: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] ALT (912) 30: Graph functions expressed symbolically, and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] ALT (912) 33: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] ALT (912) 37: Use the mean and standard deviation of a data set to fit it to a normal distribution and to estimate population percentages. Recognize that there are data sets for which such a procedure is not appropriate. Use calculators, spreadsheets, and tables to estimate areas under the normal curve. [SID4] [MA2013] PRE (912) 44: Understand statistics as a process for making inferences about population parameters based on a random sample from that population. [SIC1] [MA2013] PRE (912) 45: Decide if a specified model is consistent with results from a given datagenerating process, e.g., using simulation. [SIC2] [MA2013] PRE (912) 46: Recognize the purposes of and differences among sample surveys, experiments, and observational studies; explain how randomization relates to each. [SIC3] [MA2013] PRE (912) 49: Evaluate reports based on data. [SIC6] [MA2013] ALT (912) 41: (+) Use probabilities to make fair decisions (e.g., drawing by lots, using a random number generator). [SMD6] [MA2013] ALT (912) 42: (+) Analyze decisions and strategies using probability concepts (e.g., product testing, medical testing, pulling a hockey goalie at the end of a game). [SMD7] [MA2013] AL1 (912) 35: Write arithmetic and geometric sequences both recursively and with an explicit formula, use them to model situations, and translate between the two forms.* [FBF2]
Subject: Health,Mathematics Title: Make a Conjecture
Description: In this lesson, one of a multipart unit from Illuminations, students explore rates of change and accumulation in context. They are asked to think about the mathematics involved in determining the amount of blood being pumped by a heart. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: Graph Chart
Description:
This reproducible transparency, from an Illuminations lesson, contains the answers to the similarly named student activity in which students identify the independent and dependent variables, the function, symbolic function rule and rationale for a set of graphs.
Standard(s): [MA2013] (6) 20: Use variables to represent two quantities in a realworld problem that change in relationship to one another; write an equation to express one quantity, thought of as the dependent variable, in terms of the other quantity, thought of as the independent variable. Analyze the relationship between the dependent and independent variables using graphs and tables, and relate these to the equation. [6EE9] [MA2013] (7) 2: Recognize and represent proportional relationships between quantities. [7RP2] [MA2013] (8) 7: Graph proportional relationships, interpreting the unit rate as the slope of the graph. Compare two different proportional relationships represented in different ways. [8EE5] [MA2013] (8) 11: Understand that a function is a rule that assigns to each input exactly one output. The graph of a function is the set of ordered pairs consisting of an input and the corresponding output. (Function notation is not required in Grade 8.) [8F1] [MA2013] (8) 12: Compare properties of two functions, each represented in a different way (algebraically, graphically, numerically in tables, or by verbal descriptions). [8F2] [MA2013] (8) 13: Interpret the equation y = mx + b as defining a linear function whose graph is a straight line; give examples of functions that are not linear. [8F3] [MA2013] (8) 14: Construct a function to model a linear relationship between two quantities. Determine the rate of change and initial value of the function from a description of a relationship or from two (x,y) values, including reading these from a table or from a graph. Interpret the rate of change and initial value of linear function in terms of the situation it models and in terms of its graph or a table of values. [8F4] [MA2013] (8) 26: Know that straight lines are widely used to model relationships between two quantitative variables. For scatter plots that suggest a linear association, informally fit a straight line, and informally assess the model fit by judging the closeness of the data points to the line. [8SP2] [MA2013] (8) 27: Use the equation of a linear model to solve problems in the context of bivariate measurement data, interpreting the slope and intercept. [8SP3] [MA2013] AL1 (912) 13: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL1 (912) 22: Understand that the graph of an equation in two variables is the set of all its solutions plotted in the coordinate plane, often forming a curve (which could be a line). [AREI10] [MA2013] AL1 (912) 25: Understand that a function from one set (called the domain) to another set (called the range) assigns to each element of the domain exactly one element of the range. If f is a function and x is an element of its domain, then f(x) denotes the output of f corresponding to the input x. The graph of f is the graph of the equation y = f(x). [FIF1] [MA2013] AL1 (912) 26: Use function notation, evaluate functions for inputs in their domains, and interpret statements that use function notation in terms of a context. [FIF2] [MA2013] AL1 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 31: Graph functions expressed symbolically and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] AL1 (912) 32: Write a function defined by an expression in different but equivalent forms to reveal and explain different properties of the function. [FIF8] [MA2013] AL1 (912) 34: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 40: Interpret the parameters in a linear or exponential function in terms of a context. [FLE5] [MA2013] AL1 (912) 45: Represent data on two quantitative variables on a scatter plot, and describe how the variables are related. [SID6] [MA2013] ALC (912) 1: Create algebraic models for applicationbased problems by developing and solving equations and inequalities, including those involving direct, inverse, and joint variation. (Alabama) [MA2013] AL2 (912) 12: Interpret expressions that represent a quantity in terms of its context.* [ASSE1] [MA2013] AL2 (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL2 (912) 30: Graph functions expressed symbolically, and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] ALT (912) 12: Interpret expressions that represent a quantity in terms of its context.* [ASSE1] [MA2013] PRE (912) 16: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. (Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity. Determine odd, even, neither.)* [FIF4] (Alabama) [MA2013] PRE (912) 17: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] ALT (912) 30: Graph functions expressed symbolically, and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] ALT (912) 33: Write a function that describes a relationship between two quantities.* [FBF1]
Subject: Mathematics Title: Graph Chart
Description: This reproducible transparency, from an Illuminations lesson, contains the answers to the similarly named student activity in which students identify the independent and dependent variables, the function, symbolic function rule and rationale for a set of graphs. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: Automobile Mileage: Comparing and Contrasting
Description:
In this lesson, one of a multipart unit from Illuminations, students compare and contrast their findings from previous lessons of the unit. This lesson allows students the time they need to think about and discuss what they have done in the previous lessons. This lesson provides the teacher with another opportunity to listen to student discourse and assess student understanding.
Standard(s): [MA2013] (8) 7: Graph proportional relationships, interpreting the unit rate as the slope of the graph. Compare two different proportional relationships represented in different ways. [8EE5] [MA2013] (8) 14: Construct a function to model a linear relationship between two quantities. Determine the rate of change and initial value of the function from a description of a relationship or from two (x,y) values, including reading these from a table or from a graph. Interpret the rate of change and initial value of linear function in terms of the situation it models and in terms of its graph or a table of values. [8F4] [MA2013] (8) 25: Construct and interpret scatter plots for bivariate measurement data to investigate patterns of association between two quantities. Describe patterns such as clustering, outliers, positive or negative association, linear association, and nonlinear association. [8SP1] [MA2013] (8) 26: Know that straight lines are widely used to model relationships between two quantitative variables. For scatter plots that suggest a linear association, informally fit a straight line, and informally assess the model fit by judging the closeness of the data points to the line. [8SP2] [MA2013] (8) 27: Use the equation of a linear model to solve problems in the context of bivariate measurement data, interpreting the slope and intercept. [8SP3] [MA2013] AL1 (912) 13: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL1 (912) 22: Understand that the graph of an equation in two variables is the set of all its solutions plotted in the coordinate plane, often forming a curve (which could be a line). [AREI10] [MA2013] AL1 (912) 28: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity.* [FIF4] [MA2013] AL1 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 31: Graph functions expressed symbolically and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] AL1 (912) 34: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 40: Interpret the parameters in a linear or exponential function in terms of a context. [FLE5] [MA2013] AL1 (912) 45: Represent data on two quantitative variables on a scatter plot, and describe how the variables are related. [SID6] [MA2013] AL1 (912) 46: Interpret the slope (rate of change) and the intercept (constant term) of a linear model in the context of the data. [SID7] [MA2013] PRE (912) 42: Compute (using technology) and interpret the correlation coefficient of a linear fit. [SID8] [MA2013] ALC (912) 12: Create a model of a set of data by estimating the equation of a curve of best fit from tables of values or scatter plots. (Alabama) [MA2013] AL2 (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL2 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] ALT (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] PRE (912) 16: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. (Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity. Determine odd, even, neither.)* [FIF4] (Alabama) [MA2013] ALT (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] PRE (912) 17: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] ALT (912) 33: Write a function that describes a relationship between two quantities.* [FBF1]
Subject: Mathematics Title: Automobile Mileage: Comparing and Contrasting
Description: In this lesson, one of a multipart unit from Illuminations, students compare and contrast their findings from previous lessons of the unit. This lesson allows students the time they need to think about and discuss what they have done in the previous lessons. This lesson provides the teacher with another opportunity to listen to student discourse and assess student understanding. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: Bathtub Water Levels
Description:
In this lesson, one of a multipart unit from Illuminations, students examine reallife data that illustrates a negative slope. Students interpret the meaning of the negative slope and yintercept of the graph of the reallife data. By examining the graphical representation of the data, students relate the slope and yintercept of the least squares regression line to the reallife data. They also interpret the correlation coefficient of the least squares regression line. This lesson incorporates an interactive regression line applet.
Standard(s): [MA2013] (8) 7: Graph proportional relationships, interpreting the unit rate as the slope of the graph. Compare two different proportional relationships represented in different ways. [8EE5] [MA2013] (8) 14: Construct a function to model a linear relationship between two quantities. Determine the rate of change and initial value of the function from a description of a relationship or from two (x,y) values, including reading these from a table or from a graph. Interpret the rate of change and initial value of linear function in terms of the situation it models and in terms of its graph or a table of values. [8F4] [MA2013] (8) 25: Construct and interpret scatter plots for bivariate measurement data to investigate patterns of association between two quantities. Describe patterns such as clustering, outliers, positive or negative association, linear association, and nonlinear association. [8SP1] [MA2013] (8) 26: Know that straight lines are widely used to model relationships between two quantitative variables. For scatter plots that suggest a linear association, informally fit a straight line, and informally assess the model fit by judging the closeness of the data points to the line. [8SP2] [MA2013] (8) 27: Use the equation of a linear model to solve problems in the context of bivariate measurement data, interpreting the slope and intercept. [8SP3] [MA2013] AL1 (912) 13: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL1 (912) 22: Understand that the graph of an equation in two variables is the set of all its solutions plotted in the coordinate plane, often forming a curve (which could be a line). [AREI10] [MA2013] AL1 (912) 28: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity.* [FIF4] [MA2013] AL1 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 34: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 40: Interpret the parameters in a linear or exponential function in terms of a context. [FLE5] [MA2013] AL1 (912) 45: Represent data on two quantitative variables on a scatter plot, and describe how the variables are related. [SID6] [MA2013] AL1 (912) 46: Interpret the slope (rate of change) and the intercept (constant term) of a linear model in the context of the data. [SID7] [MA2013] PRE (912) 42: Compute (using technology) and interpret the correlation coefficient of a linear fit. [SID8] [MA2013] ALC (912) 12: Create a model of a set of data by estimating the equation of a curve of best fit from tables of values or scatter plots. (Alabama) [MA2013] AL2 (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL2 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] ALT (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] PRE (912) 16: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. (Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity. Determine odd, even, neither.)* [FIF4] (Alabama) [MA2013] ALT (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] PRE (912) 17: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] ALT (912) 33: Write a function that describes a relationship between two quantities.* [FBF1]
Subject: Mathematics Title: Bathtub Water Levels
Description: In this lesson, one of a multipart unit from Illuminations, students examine reallife data that illustrates a negative slope. Students interpret the meaning of the negative slope and yintercept of the graph of the reallife data. By examining the graphical representation of the data, students relate the slope and yintercept of the least squares regression line to the reallife data. They also interpret the correlation coefficient of the least squares regression line. This lesson incorporates an interactive regression line applet. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: Exploring Linear Data
Description:
In this lesson, from Illuminations, students model linear data in a variety of settings. Students can work alone or in small groups to construct scatterplots, interpret data points and trends, and investigate the notion of line of best fit.
Standard(s): [S1] (8) 1: Identify steps within the scientific process. [MA2013] (8) 7: Graph proportional relationships, interpreting the unit rate as the slope of the graph. Compare two different proportional relationships represented in different ways. [8EE5] [MA2013] (8) 12: Compare properties of two functions, each represented in a different way (algebraically, graphically, numerically in tables, or by verbal descriptions). [8F2] [MA2013] (8) 13: Interpret the equation y = mx + b as defining a linear function whose graph is a straight line; give examples of functions that are not linear. [8F3] [MA2013] (8) 14: Construct a function to model a linear relationship between two quantities. Determine the rate of change and initial value of the function from a description of a relationship or from two (x,y) values, including reading these from a table or from a graph. Interpret the rate of change and initial value of linear function in terms of the situation it models and in terms of its graph or a table of values. [8F4] [MA2013] (8) 15: Describe qualitatively the functional relationship between two quantities by analyzing a graph (e.g., where the function is increasing or decreasing, linear or nonlinear). Sketch a graph that exhibits the qualitative features of a function that has been described verbally. [8F5] [MA2013] (8) 25: Construct and interpret scatter plots for bivariate measurement data to investigate patterns of association between two quantities. Describe patterns such as clustering, outliers, positive or negative association, linear association, and nonlinear association. [8SP1] [MA2013] (8) 26: Know that straight lines are widely used to model relationships between two quantitative variables. For scatter plots that suggest a linear association, informally fit a straight line, and informally assess the model fit by judging the closeness of the data points to the line. [8SP2] [MA2013] (8) 27: Use the equation of a linear model to solve problems in the context of bivariate measurement data, interpreting the slope and intercept. [8SP3] [MA2013] (8) 28: Understand that patterns of association can also be seen in bivariate categorical data by displaying frequencies and relative frequencies in a twoway table. Construct and interpret a twoway table summarizing data on two categorical variables collected from the same subjects. Use relative frequencies calculated for rows or columns to describe possible association between the two variables. [8SP4] [MA2013] AL1 (912) 13: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL1 (912) 14: Represent constraints by equations or inequalities, and by systems of equations and/or inequalities and interpret solutions as viable or nonviable options in a modeling context. [ACED3] [MA2013] AL1 (912) 28: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity.* [FIF4] [MA2013] AL1 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 31: Graph functions expressed symbolically and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] AL1 (912) 34: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 40: Interpret the parameters in a linear or exponential function in terms of a context. [FLE5] [MA2013] AL1 (912) 46: Interpret the slope (rate of change) and the intercept (constant term) of a linear model in the context of the data. [SID7] [MA2013] PRE (912) 42: Compute (using technology) and interpret the correlation coefficient of a linear fit. [SID8] [MA2013] ALC (912) 1: Create algebraic models for applicationbased problems by developing and solving equations and inequalities, including those involving direct, inverse, and joint variation. (Alabama) [MA2013] ALC (912) 7: Use analytical, numerical, and graphical methods to make financial and economic decisions, including those involving banking and investments, insurance, personal budgets, credit purchases, recreation, and deceptive and fraudulent pricing and advertising. (Alabama) [MA2013] ALC (912) 12: Create a model of a set of data by estimating the equation of a curve of best fit from tables of values or scatter plots. (Alabama) [MA2013] AL2 (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL2 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] ALT (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] PRE (912) 16: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. (Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity. Determine odd, even, neither.)* [FIF4] (Alabama) [MA2013] ALT (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] PRE (912) 17: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] ALT (912) 33: Write a function that describes a relationship between two quantities.* [FBF1]
Subject: Mathematics Title: Exploring Linear Data
Description: In this lesson, from Illuminations, students model linear data in a variety of settings. Students can work alone or in small groups to construct scatterplots, interpret data points and trends, and investigate the notion of line of best fit. Thinkfinity Partner: Illuminations Grade Span: 6,7,8,9,10,11,12
Save to ALEX 
Share

Show Details
Title: Gallery Walk
Description:
In this lesson, one of a multipart unit from Illuminations, students view the work of other students in the class and explain their own work. Students move from graph to graph during this time and, without any talking, view the work of their classmates. While on their Gallery Walk, the students think about the data their classmates plotted and whether or not the information accompanying each graph seems appropriate. Each pair of students then stands next to their own work and explains one of the graphs.
Standard(s): [MA2013] (8) 7: Graph proportional relationships, interpreting the unit rate as the slope of the graph. Compare two different proportional relationships represented in different ways. [8EE5] [MA2013] (8) 11: Understand that a function is a rule that assigns to each input exactly one output. The graph of a function is the set of ordered pairs consisting of an input and the corresponding output. (Function notation is not required in Grade 8.) [8F1] [MA2013] (8) 12: Compare properties of two functions, each represented in a different way (algebraically, graphically, numerically in tables, or by verbal descriptions). [8F2] [MA2013] (8) 13: Interpret the equation y = mx + b as defining a linear function whose graph is a straight line; give examples of functions that are not linear. [8F3] [MA2013] (8) 14: Construct a function to model a linear relationship between two quantities. Determine the rate of change and initial value of the function from a description of a relationship or from two (x,y) values, including reading these from a table or from a graph. Interpret the rate of change and initial value of linear function in terms of the situation it models and in terms of its graph or a table of values. [8F4] [MA2013] (8) 15: Describe qualitatively the functional relationship between two quantities by analyzing a graph (e.g., where the function is increasing or decreasing, linear or nonlinear). Sketch a graph that exhibits the qualitative features of a function that has been described verbally. [8F5] [MA2013] (8) 25: Construct and interpret scatter plots for bivariate measurement data to investigate patterns of association between two quantities. Describe patterns such as clustering, outliers, positive or negative association, linear association, and nonlinear association. [8SP1] [MA2013] (8) 26: Know that straight lines are widely used to model relationships between two quantitative variables. For scatter plots that suggest a linear association, informally fit a straight line, and informally assess the model fit by judging the closeness of the data points to the line. [8SP2] [MA2013] (8) 27: Use the equation of a linear model to solve problems in the context of bivariate measurement data, interpreting the slope and intercept. [8SP3] [MA2013] AL1 (912) 13: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL1 (912) 22: Understand that the graph of an equation in two variables is the set of all its solutions plotted in the coordinate plane, often forming a curve (which could be a line). [AREI10] [MA2013] AL1 (912) 25: Understand that a function from one set (called the domain) to another set (called the range) assigns to each element of the domain exactly one element of the range. If f is a function and x is an element of its domain, then f(x) denotes the output of f corresponding to the input x. The graph of f is the graph of the equation y = f(x). [FIF1] [MA2013] AL1 (912) 26: Use function notation, evaluate functions for inputs in their domains, and interpret statements that use function notation in terms of a context. [FIF2] [MA2013] AL1 (912) 28: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity.* [FIF4] [MA2013] AL1 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 31: Graph functions expressed symbolically and show key features of the graph, by hand in simple cases and using technology for more complicated cases.* [FIF7] [MA2013] AL1 (912) 34: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 40: Interpret the parameters in a linear or exponential function in terms of a context. [FLE5] [MA2013] AL1 (912) 46: Interpret the slope (rate of change) and the intercept (constant term) of a linear model in the context of the data. [SID7] [MA2013] ALC (912) 12: Create a model of a set of data by estimating the equation of a curve of best fit from tables of values or scatter plots. (Alabama) [MA2013] AL2 (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL2 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] ALT (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] PRE (912) 16: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. (Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity. Determine odd, even, neither.)* [FIF4] (Alabama) [MA2013] ALT (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] PRE (912) 17: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] ALT (912) 33: Write a function that describes a relationship between two quantities.* [FBF1]
Subject: Mathematics Title: Gallery Walk
Description: In this lesson, one of a multipart unit from Illuminations, students view the work of other students in the class and explain their own work. Students move from graph to graph during this time and, without any talking, view the work of their classmates. While on their Gallery Walk, the students think about the data their classmates plotted and whether or not the information accompanying each graph seems appropriate. Each pair of students then stands next to their own work and explains one of the graphs. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: Cardiac Output, Rates of Change, and Accumulation
Description:
In this unit of four lessons, from Illuminations, students explore the measurement of the amount of blood being pumped by a heart. The measurement is based upon two common problems: (1) a flow rate and accumulation problem and (2) a concentration problem.
Standard(s): [S1] A&P (912) 9: Identify structures and functions of the cardiovascular system. [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 32: Write a function defined by an expression in different but equivalent forms to reveal and explain different properties of the function. [FIF8] [MA2013] AL1 (912) 46: Interpret the slope (rate of change) and the intercept (constant term) of a linear model in the context of the data. [SID7] [MA2013] PRE (912) 17: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6]
Subject: Health,Mathematics,Science Title: Cardiac Output, Rates of Change, and Accumulation
Description: In this unit of four lessons, from Illuminations, students explore the measurement of the amount of blood being pumped by a heart. The measurement is based upon two common problems: (1) a flow rate and accumulation problem and (2) a concentration problem. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: Least Squares Regression
Description:
In this ninelesson unit, from Illuminations, students interpret the slope and yintercept of least squares regression lines in the context of reallife data. Students use an interactive applet to plot the data and calculate the correlation coefficient and equation of the least squares regression line. These lessons develop skills in connecting, communicating, reasoning, and problem solving as well as representing fundamental ideas about data.
Standard(s): [MA2013] (8) 14: Construct a function to model a linear relationship between two quantities. Determine the rate of change and initial value of the function from a description of a relationship or from two (x,y) values, including reading these from a table or from a graph. Interpret the rate of change and initial value of linear function in terms of the situation it models and in terms of its graph or a table of values. [8F4] [MA2013] (8) 25: Construct and interpret scatter plots for bivariate measurement data to investigate patterns of association between two quantities. Describe patterns such as clustering, outliers, positive or negative association, linear association, and nonlinear association. [8SP1] [MA2013] (8) 26: Know that straight lines are widely used to model relationships between two quantitative variables. For scatter plots that suggest a linear association, informally fit a straight line, and informally assess the model fit by judging the closeness of the data points to the line. [8SP2] [MA2013] (8) 27: Use the equation of a linear model to solve problems in the context of bivariate measurement data, interpreting the slope and intercept. [8SP3] [MA2013] (8) 28: Understand that patterns of association can also be seen in bivariate categorical data by displaying frequencies and relative frequencies in a twoway table. Construct and interpret a twoway table summarizing data on two categorical variables collected from the same subjects. Use relative frequencies calculated for rows or columns to describe possible association between the two variables. [8SP4] [MA2013] AL1 (912) 13: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL1 (912) 28: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity.* [FIF4] [MA2013] AL1 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 34: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 45: Represent data on two quantitative variables on a scatter plot, and describe how the variables are related. [SID6] [MA2013] AL1 (912) 46: Interpret the slope (rate of change) and the intercept (constant term) of a linear model in the context of the data. [SID7] [MA2013] PRE (912) 42: Compute (using technology) and interpret the correlation coefficient of a linear fit. [SID8] [MA2013] ALC (912) 12: Create a model of a set of data by estimating the equation of a curve of best fit from tables of values or scatter plots. (Alabama) [MA2013] AL2 (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL2 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] ALT (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] ALT (912) 22: Represent constraints by equations or inequalities, and by systems of equations and/or inequalities, and interpret solutions as viable or nonviable options in a modeling context. [ACED3] [MA2013] PRE (912) 16: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. (Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity. Determine odd, even, neither.)* [FIF4] (Alabama) [MA2013] ALT (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] PRE (912) 17: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] ALT (912) 33: Write a function that describes a relationship between two quantities.* [FBF1]
Subject: Mathematics Title: Least Squares Regression
Description: In this ninelesson unit, from Illuminations, students interpret the slope and yintercept of least squares regression lines in the context of reallife data. Students use an interactive applet to plot the data and calculate the correlation coefficient and equation of the least squares regression line. These lessons develop skills in connecting, communicating, reasoning, and problem solving as well as representing fundamental ideas about data. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: Smokey Bear Takes Algebra
Description:
In this lesson, from Illuminations, students learn about the many factors that play a role in creating a forestfire danger rating index. They work with the Angstrom and Nesterov Indexes, explain the relationship between relative humidity and fire danger, and use graphing calculators to model the relationship between the slope of the land versus the rate of fire spread.
Standard(s): [MA2013] AL1 (912) 34: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] AL1 (912) 46: Interpret the slope (rate of change) and the intercept (constant term) of a linear model in the context of the data. [SID7] [MA2013] PRE (912) 17: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 35: Write arithmetic and geometric sequences both recursively and with an explicit formula, use them to model situations, and translate between the two forms.* [FBF2]
Subject: Mathematics,Science Title: Smokey Bear Takes Algebra
Description: In this lesson, from Illuminations, students learn about the many factors that play a role in creating a forestfire danger rating index. They work with the Angstrom and Nesterov Indexes, explain the relationship between relative humidity and fire danger, and use graphing calculators to model the relationship between the slope of the land versus the rate of fire spread. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: Pedal Power
Description:
In this Illuminations lesson, students compare, contrast, and make conjectures based on distancetime graphs for three bicyclists climbing to the top of a mountain. They determine the slopes of the graphs and interpret them as rates of change.
Standard(s): [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 46: Interpret the slope (rate of change) and the intercept (constant term) of a linear model in the context of the data. [SID7] [MA2013] PRE (912) 17: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6]
Subject: Mathematics Title: Pedal Power
Description: In this Illuminations lesson, students compare, contrast, and make conjectures based on distancetime graphs for three bicyclists climbing to the top of a mountain. They determine the slopes of the graphs and interpret them as rates of change. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: Movie Lines
Description:
This Illuminations lesson allows students to apply their knowledge of linear equations and graphs in an authentic situation. Students plot data points corresponding to the cost of DVD rentals and interpret the results.
Standard(s): [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 45: Represent data on two quantitative variables on a scatter plot, and describe how the variables are related. [SID6] [MA2013] AL1 (912) 46: Interpret the slope (rate of change) and the intercept (constant term) of a linear model in the context of the data. [SID7] [MA2013] PRE (912) 17: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6]
Subject: Mathematics Title: Movie Lines
Description: This Illuminations lesson allows students to apply their knowledge of linear equations and graphs in an authentic situation. Students plot data points corresponding to the cost of DVD rentals and interpret the results. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: The Effects of Outliers
Description:
This lesson, one of a multipart unit from Illuminations, provides students with the opportunity to investigate the relationship between a set of data points and a curve used to fit the data points, using a computerbased interactive tool. Using the Regression Line Applet, students investigate the effect of outliers on a regression line and easily see their significance.
Standard(s): [MA2013] (8) 25: Construct and interpret scatter plots for bivariate measurement data to investigate patterns of association between two quantities. Describe patterns such as clustering, outliers, positive or negative association, linear association, and nonlinear association. [8SP1] [MA2013] (8) 26: Know that straight lines are widely used to model relationships between two quantitative variables. For scatter plots that suggest a linear association, informally fit a straight line, and informally assess the model fit by judging the closeness of the data points to the line. [8SP2] [MA2013] (8) 28: Understand that patterns of association can also be seen in bivariate categorical data by displaying frequencies and relative frequencies in a twoway table. Construct and interpret a twoway table summarizing data on two categorical variables collected from the same subjects. Use relative frequencies calculated for rows or columns to describe possible association between the two variables. [8SP4] [MA2013] AL1 (912) 13: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL1 (912) 28: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity.* [FIF4] [MA2013] AL1 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 34: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 40: Interpret the parameters in a linear or exponential function in terms of a context. [FLE5] [MA2013] AL1 (912) 43: Interpret differences in shape, center, and spread in the context of the data sets, accounting for possible effects of extreme data points (outliers). [SID3] [MA2013] AL1 (912) 45: Represent data on two quantitative variables on a scatter plot, and describe how the variables are related. [SID6] [MA2013] AL1 (912) 46: Interpret the slope (rate of change) and the intercept (constant term) of a linear model in the context of the data. [SID7] [MA2013] PRE (912) 42: Compute (using technology) and interpret the correlation coefficient of a linear fit. [SID8] [MA2013] ALC (912) 12: Create a model of a set of data by estimating the equation of a curve of best fit from tables of values or scatter plots. (Alabama) [MA2013] AL2 (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL2 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] ALT (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] PRE (912) 16: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. (Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity. Determine odd, even, neither.)* [FIF4] (Alabama) [MA2013] ALT (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] PRE (912) 17: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] ALT (912) 33: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] PRE (912) 44: Understand statistics as a process for making inferences about population parameters based on a random sample from that population. [SIC1]
Subject: Mathematics Title: The Effects of Outliers
Description: This lesson, one of a multipart unit from Illuminations, provides students with the opportunity to investigate the relationship between a set of data points and a curve used to fit the data points, using a computerbased interactive tool. Using the Regression Line Applet, students investigate the effect of outliers on a regression line and easily see their significance. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: Traveling Distances
Description:
In this lesson, one of a multipart unit from Illuminations, students interpret the meaning of the slope and yintercept of a graph of reallife data. By examining the graphical representation of the data, students relate the slope and yintercept of the least squares regression line to the reallife data. They also interpret the correlation coefficient of the resulting least squares regression line. This lesson incorporates an interactive regression line applet.
Standard(s): [MA2013] (8) 25: Construct and interpret scatter plots for bivariate measurement data to investigate patterns of association between two quantities. Describe patterns such as clustering, outliers, positive or negative association, linear association, and nonlinear association. [8SP1] [MA2013] (8) 26: Know that straight lines are widely used to model relationships between two quantitative variables. For scatter plots that suggest a linear association, informally fit a straight line, and informally assess the model fit by judging the closeness of the data points to the line. [8SP2] [MA2013] (8) 27: Use the equation of a linear model to solve problems in the context of bivariate measurement data, interpreting the slope and intercept. [8SP3] [MA2013] (8) 28: Understand that patterns of association can also be seen in bivariate categorical data by displaying frequencies and relative frequencies in a twoway table. Construct and interpret a twoway table summarizing data on two categorical variables collected from the same subjects. Use relative frequencies calculated for rows or columns to describe possible association between the two variables. [8SP4] [MA2013] AL1 (912) 13: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL1 (912) 28: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity.* [FIF4] [MA2013] AL1 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 34: Write a function that describes a relationship between two quantities.* [FBF1] [MA2013] AL1 (912) 37: Distinguish between situations that can be modeled with linear functions and with exponential functions. [FLE1] [MA2013] AL1 (912) 38: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two inputoutput pairs (include reading these from a table). [FLE2] [MA2013] AL1 (912) 45: Represent data on two quantitative variables on a scatter plot, and describe how the variables are related. [SID6] [MA2013] AL1 (912) 46: Interpret the slope (rate of change) and the intercept (constant term) of a linear model in the context of the data. [SID7] [MA2013] PRE (912) 42: Compute (using technology) and interpret the correlation coefficient of a linear fit. [SID8] [MA2013] ALC (912) 12: Create a model of a set of data by estimating the equation of a curve of best fit from tables of values or scatter plots. (Alabama) [MA2013] AL2 (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] AL2 (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] ALT (912) 21: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [ACED2] [MA2013] PRE (912) 16: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. (Key features include intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity. Determine odd, even, neither.)* [FIF4] (Alabama) [MA2013] ALT (912) 29: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.* [FIF5] [MA2013] PRE (912) 17: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] ALT (912) 33: Write a function that describes a relationship between two quantities.* [FBF1]
Subject: Mathematics Title: Traveling Distances
Description: In this lesson, one of a multipart unit from Illuminations, students interpret the meaning of the slope and yintercept of a graph of reallife data. By examining the graphical representation of the data, students relate the slope and yintercept of the least squares regression line to the reallife data. They also interpret the correlation coefficient of the resulting least squares regression line. This lesson incorporates an interactive regression line applet. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Save to ALEX 
Share

Show Details
Title: Rates of Change in Pick's Theorem
Description:
In this lesson, one of a multipart unit from Illuminations, students use a spreadsheet to investigate rates of change among various figures created on a geoboard. The coefficients of Pick s Theorem are easily determined from these rates of change.
Standard(s): [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] AL1 (912) 32: Write a function defined by an expression in different but equivalent forms to reveal and explain different properties of the function. [FIF8] [MA2013] AL1 (912) 46: Interpret the slope (rate of change) and the intercept (constant term) of a linear model in the context of the data. [SID7] [MA2013] PRE (912) 17: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6]
Subject: Mathematics Title: Rates of Change in Pick's Theorem
Description: In this lesson, one of a multipart unit from Illuminations, students use a spreadsheet to investigate rates of change among various figures created on a geoboard. The coefficients of Pick s Theorem are easily determined from these rates of change. Thinkfinity Partner: Illuminations Grade Span: 9,10,11,12
Web Resources
Interactives/Games
Save to ALEX 
Share

Show Details
Title: Graphing Tangent Lines
Description:
This activity allows the user to graph a function along with the tangent line at a particular point. The user can use a scroll bar to slide the point along the curve. The derivative at that point is also displayed.
Standard(s): [MA2013] PRE (912) 17: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6]
Graphing Tangent Lines
http://www.shodor.or...
This activity allows the user to graph a function along with the tangent line at a particular point. The user can use a scroll bar to slide the point along the curve. The derivative at that point is also displayed.
Save to ALEX 
Share

Show Details
Title: Rate of Change Grapher
Description:
This is an interactive graph. It graphs the f(x) graph along with the df/dx graph.
Standard(s): [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] PRE (912) 17: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6]
Rate of Change Grapher
http://phet.colorado...
This is an interactive graph. It graphs the f(x) graph along with the df/dx graph.
Learning Activities
Save to ALEX 
Share

Show Details
Title: Rate of Change Grapher
Description:
This is an interactive graph. It graphs the f(x) graph along with the df/dx graph.
Standard(s): [MA2013] AL1 (912) 30: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6] [MA2013] PRE (912) 17: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.* [FIF6]
Rate of Change Grapher
http://phet.colorado...
This is an interactive graph. It graphs the f(x) graph along with the df/dx graph.

