Courses of Study: Manufacturing

Back
Manufacturing (2009)
Grade(s): 9 - 12
Intermediate Lathe and Bench Work
All Resources: 0
Learning Activities: 0
Lesson Plans: 0
Multimedia: 0
Unit Plans: 0
1.) Apply safety rules, regulations, and procedures for lathe and benchwork.

Manufacturing (2009)
Grade(s): 9 - 12
Intermediate Lathe and Bench Work
All Resources: 0
Learning Activities: 0
Lesson Plans: 0
Multimedia: 0
Unit Plans: 0
2.) Demonstrate maintenance of the lathe, including cleaning, inspecting, lubricating, and setting up.

Manufacturing (2009)
Grade(s): 9 - 12
Intermediate Lathe and Bench Work
All Resources: 0
Learning Activities: 0
Lesson Plans: 0
Multimedia: 0
Unit Plans: 0
3.) Demonstrate intermediate lathe operations, including calculating speed and feed per material and tooling, aligning the tailstock, reaming a hole, boring a hole, counterboring a hole, forming a cut, machining an O-ring groove, parting off the work piece, turning a shaft between centers, and turning close tolerance diameters.

Manufacturing (2009)
Grade(s): 9 - 12
Intermediate Lathe and Bench Work
All Resources: 0
Learning Activities: 0
Lesson Plans: 0
Multimedia: 0
Unit Plans: 0
4.) Demonstrate intermediate boring, turning, facing, and tapping on a work piece.

Manufacturing (2009)
Grade(s): 9 - 12
Intermediate Lathe and Bench Work
All Resources: 0
Learning Activities: 0
Lesson Plans: 0
Multimedia: 0
Unit Plans: 0
5.) Demonstrate advanced-level engine lathe operations, including calculating speed and feed for appropriate materials and tooling, turning multiple diameters, using taper attachment, power tapping on a lathe, chasing right and left hand internal threads, boring a hole, and boring an internal angle.

Manufacturing (2009)
Grade(s): 9 - 12
Intermediate Lathe and Bench Work
All Resources: 0
Learning Activities: 0
Lesson Plans: 0
Multimedia: 0
Unit Plans: 0
6.) Demonstrate advanced boring, turning, facing, and tapping on a work piece according to National Institute for Metalworking Skills (NIMS) Level I standards.

Manufacturing (2009)
Grade(s): 9 - 12
Intermediate Lathe and Bench Work
All Resources: 0
Learning Activities: 0
Lesson Plans: 0
Multimedia: 0
Unit Plans: 0
7.) Apply benchwork skills and safety practices, including broaching an internal keyway, installing a press fit bushing, hand-grinding cutting tools, using a pitch gage and a micrometer for determining thread size, and laying out a part according to print specifications.

Manufacturing (2009)
Grade(s): 9 - 12
Intermediate Lathe and Bench Work
All Resources: 0
Learning Activities: 0
Lesson Plans: 0
Multimedia: 0
Unit Plans: 0
8.) Demonstrate care and safety for a bench grinder.

Examples: maintenance—operating, cleaning, lubricating, setting up

Manufacturing (2009)
Grade(s): 9 - 12
Intermediate Lathe and Bench Work
All Resources: 0
Learning Activities: 0
Lesson Plans: 0
Multimedia: 0
Unit Plans: 0
9.) Demonstrate grinding techniques, including setting up and grinding a threading tool, grinding a right hand angle turning tool, grinding a grooving tool, grinding an angle using a sine bar, and grinding a grooving tool.